We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular lithium polymer battery, flat grey finish, thin profile, two connector pins visible

Cameron Sino Battery for Flir One, One 2st SDL352054 185mAh 0.68Wh

SKU CH-8M6H-970DG

Replacement lithium-polymer cell for Flir One and One 2st thermal cameras, 185 mAh, 3.7 V, 54.00 × 20.54 × 3.60 mm

  • Total capacity185 mAh / 0.68 Wh
  • Pack contents54 × 20.54 × 3.6
  • Battery chemistryLithium polymer
  • Product typeLithium polymer
  • Compatible with Flir One and One 2st thermal cameras
  • 185 mAh capacity delivers 0.68 Wh of power
  • Lithium-polymer cell weighs only 6.0 g
  • Built-in protection against overcharge, over-discharge and short circuit
  • Fully decoded chip works like the original battery

Compatible Thermal Camera Battery

This replacement battery fits the Flir One and One 2st thermal cameras. It uses a lithium-polymer cell rated at 185mAh and 0.68Wh with a nominal voltage of 3.7V. The fully decoded chip is designed to work like the original pack.

Slim Pack Build And Protection

The pack measures 54.00 x 20.54 x 3.60mm and weighs 6.0g, matching the original form factor for a direct fit. It includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. The unit ships in shock-absorbing foam for transit safety.

Verify Model And Connector Before Order

Confirm your camera shows the part number SDL352054 on the original battery to ensure compatibility. Check that the connector on your existing pack matches the replacement before installation. A new cell reaches full performance after two or three complete charge cycles.

How it compares

Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 75% of the 5,900 comparable items (median $17.99).

Specifications

Product
Brand nameCameron Sino
Model nameOne, One 2st
Part numberSDL352054
Total capacity185 mAh / 0.68 Wh
Product typeLithium polymer
Power
Battery chemistryLithium polymer
In the box
Pack contents54 × 20.54 × 3.6

Questions about this item

What is the 3.7 V lithium-polymer cell's capacity and energy rating?

The cell is rated at 185 mAh and 0.68 Wh, matching the original Flir SDL352054 specification.

Will the 54.00 x 20.54 x 3.60 mm pack fit the Flir One and One 2st thermal cameras?

Yes, those exact dimensions are listed for the SDL352054 replacement, so it seats in the same battery compartment.

How is the battery installed and what common step should be avoided?

Align the connector with the camera's socket and press until it clicks; the step users miss is fully seating the connector before closing the cover.

More in Camera Batteries, Grips & Chargers

Similar items