We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black camera battery with gold contacts, 40.80 x 34.30 x 5.20 mm

Cameron Sino DMW-BCL7 600mAh camera battery

SKU CH-92BY-HEF86

Replacement 600 mAh battery for Panasonic Lumix cameras, ISO9001, RoHS and CE certified with built-in protection circuits

  • Total capacity600 mAh/2.22 Wh
  • Pack contents40.8 × 34.3 × 5.2
  • Compatible withPanasonic battery
  • Key featuresBattery
  • Ready for Panasonic Lumix cameras with wide model compatibility
  • 600 mAh capacity delivers reliable shooting time
  • 7 V 2.22 Wh lithium cell matches original voltage
  • 80 x 34.30 x 5.20 mm slim design fits battery compartment
  • Built-in protection guards against overcharge and short circuit

Compatible Panasonic Lumix replacement

The Cameron Sino DMW-BCL7 is a new lithium-ion battery built for a wide range of Panasonic Lumix compact cameras including the DMC-F5, FH10, FS50, SZ3, SZ9 and XS1 series. It replaces the original Panasonic DMW-BCL7 and DMW-BCL7E packs and carries ISO9001, RoHS and CE certification. Photographers needing a spare or replacement power source for these specific models will find a direct fit.

600mAh capacity at 3.7 volts

Rated at 600mAh and 2.22Wh, the cell delivers the same nominal voltage and energy as the factory battery. The fully decoded chip communicates with the camera exactly like the original unit, so remaining-capacity readings and charging behaviour stay consistent. Measuring 40.80 x 34.30 x 5.20 mm and weighing 15.0 g, it slips into the battery compartment without forcing the door.

Upgrade from a depleted original pack

This battery is intended for owners whose original DMW-BCL7 cell no longer holds a useful charge or who want a second pack for longer outings. It is not suited for cameras that require a higher-capacity pack or a different form factor. Buyers needing more capacity per charge or a different connector should look elsewhere.

How it compares

Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 80% of the 5,900 comparable items (median $17.99).

Specifications

Product
Brand nameCameron Sino
Model nameLumix DMC-F5, Lumix DMC-F5K, Lumix DMC-F5P, Lumix DMC-F5S, Lumix DMC-FH10, Lumix DMC-FH10K, Lumix DMC-FH10P, Lumix DMC-FH10 V, Lumix DMC-FS50, Lumix DMC-FS50K, Lumix DMC-FS50P, Lumix DMC-FS50S, Lumix DMC-FS50 V, Lumix DMC-SZ3, Lumix DMC-SZ3K, Lumix DMC-SZ3P, Lumix DMC-SZ3T, Lumix DMC-SZ3 V, Lumix DMC-SZ3 W, Lumix DMC-SZ9, Lumix DMC-SZ9K, Lumix DMC-SZ9P, Lumix DMC-SZ9S, Lumix DMC-XS1, Lumix DMC-XS1K, Lumix DMC-XS1R, Lumix DMC-XS1 W
Part numberDMW-BCL7, DMW-BCL7E
Total capacity600 mAh/2.22 Wh
Compatibility
Compatible withPanasonic battery
In the box
Pack contents40.8 × 34.3 × 5.2

Questions about this item

How do I install the DMW-BCL7 battery in my Panasonic Lumix, and what step is often missed?

Insert the battery with the 3.7 V contacts facing the camera terminals, then push until the latch clicks — the step most people miss is fully seating the connector so the decoded chip registers.

What maintenance will this 600 mAh battery need later?

After 2 or 3 full charge and discharge cycles the cell reaches peak capacity; thereafter store it around 50 % charge and avoid temperatures above 60 °C to preserve the 2.22 Wh rating.

What limit appears first during continuous shooting with this 15.0 g pack?

The 600 mAh capacity is the first constraint — sustained use drains the 2.22 Wh cell quickly, so shooting time ends before thermal or voltage limits are reached.

More in Camera Batteries, Grips & Chargers

Similar items