We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion camera battery, dark grey plastic casing, gold contacts on one short edge, 40 by 31 by 5.9 mm

Cameron Sino KLIC-7006 660mAh camera battery

SKU CH-YQGW-5MMQD

Replacement 660 mAh 3.7 V battery fits Kodak EasyShare and PIXPRO cameras using part KLIC-7006

  • Total capacity660 mAh
  • Pack contents40 × 31.1 × 5.9
  • Compatible withKLIC-7006
  • 660 mAh capacity delivers reliable power for extended shooting
  • 7 V lithium-ion chemistry matches original Kodak specifications
  • Fits EasyShare M200, Touch, Friendly Zoom FZ51, FZ52, FZ53 and PIXPRO models
  • Fully decoded chip communicates with camera for accurate charge reporting
  • Certified to ISO 9001, RoHS and CE safety standards

Compatible Camera Models

This replacement battery fits a wide range of Kodak EasyShare and PIXPRO cameras including the M200, M215, M22, M23, M52, M522, M530, M531, M532, M5350, M5370, M550, M552, M565, M575, M577, M580, M583, M750, M873, M883, MD30, Mini, Touch, Friendly Zoom FZ51, FZ52, FZ53, PIXPRO FZ51, FZ53, SL5 Smart Lens, X53 and X54 models. It replaces the original KLIC-7006 and LB-012 part numbers. The fully decoded chip ensures it works just like the original battery in your device.

Capacity and Voltage Limits

The battery provides a capacity of 660mAh and an energy rating of 2.44Wh at a nominal voltage of 3.7V. These figures define the practical runtime you can expect between charges for the supported camera models. Physical dimensions are 40.00 x 31.10 x 5.90mm with a weight of 14.8g, which matches the original specifications for proper fit inside the battery compartment.

Pre-Purchase Checks

Verify the exact model number of your camera and the part number printed on your original battery before ordering to confirm compatibility. A new unit reaches its best performance after two or three complete charge and discharge cycles. Ensure the connector is properly seated during installation and avoid using low-quality third-party chargers, as these can affect battery life and safety.

How it compares

Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 75% of the 5,900 comparable items (median $17.99).

Specifications

Product
Brand nameCameron Sino
Model nameEasyShare M200, EasyShare M215, EasyShare M22, EasyShare M23, EasyShare M52, EasyShare M522, Easyshare M530, EasyShare M531, EasyShare M532, EasyShare M5350, EasyShare M5370, Easyshare M550, EasyShare M552, EasyShare M565, Easyshare M575, EasyShare M577, Easyshare M580, EasyShare M583, EasyShare M750, EasyShare M873, Easyshare M873 Zoom, EasyShare M883, Easyshare M883 Zoom, EasyShare MD30, EasyShare Mini, EasyShare Touch, Friendly Zoom FZ51, Friendly Zoom FZ52, Friendly Zoom FZ53, FZ51, FZ52, FZ53, FZ55, PIXPRO FZ51, PIXPRO FZ53, PIXPRO SL5, Pixpro SL5 Smart Lens, PIXPRO X53, PIXPRO
Part numberKLIC-7006, LB-012
Total capacity660 mAh
Compatibility
Compatible withKLIC-7006
In the box
Pack contents40 × 31.1 × 5.9

Questions about this item

Which capacity version of the KLIC-7006 fits my Kodak EasyShare M200?

The KLIC-7006 is offered in a single 660mAh capacity that matches the original battery for the EasyShare M200 and the full list of compatible models.

What does the 660mAh rating mean for daily shooting with my EasyShare Touch?

At 3.7V the cell stores 2.44Wh, giving roughly the same number of shots per charge as the factory battery in the EasyShare Touch.

Does the KLIC-7006 use a proprietary connector or a standard USB interface for charging?

It uses the original Kodak proprietary connector that fits the camera directly; charging is handled inside the camera, not via USB.

More in Camera Batteries, Grips & Chargers

Similar items