We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat rectangular lithium polymer battery pack with two wire leads

cameron sino MLP4670B1P 10000mAh 3.70V lithium polymer standard battery

SKU CH-9X5H-GZRAC

Replacement lithium-polymer battery for Maxisys MS906 series diagnostic scanners, 10000mAh at 3.70V with built-in protection circuits

  • Battery pack size114.86 × 70.1 × 9.5
  • Battery typeLithium polymer
  • Battery capacity10,000 mAh
  • Battery voltage rating3.7 V
  • Details114.86 × 70.1 × 9.5
  • Product typeLithium polymer
  • 10000 mAh capacity powers extended diagnostic sessions
  • 70 V lithium-polymer chemistry matches original specifications
  • 86 x 70.10 x 9.50 mm form factor fits Maxisys MS906 series scanners
  • Decoded chip enables direct communication with the scanner
  • ISO9001, RoHS and CE certified for safety compliance

Replacement battery for Autel MaxiSys scanners

This lithium-polymer pack is built to fit the MaxiSys MS906BT, MS906TS and MS906S diagnostic scanners. It delivers 10000mAh at 3.70V and matches the original MLP4670B1P part number. The pack measures 114.86 x 70.10 x 9.50mm and weighs 169.4g. It carries ISO9001, RoHS and CE certification.

Upgrading from a degraded original pack

Replace the factory cell when the scanner no longer holds a full day of charge or shuts down during a job. The jump is worth it if the original battery has swollen, reports a false percentage or cannot complete a 24-hour shift. A fresh pack restores the 37.00Wh capacity the tool was designed around.

Straightforward swap with a few cautions

Installation videos are widely available and the decoded chip is recognised immediately by the scanner. Connect the plug carefully and run two or three full charge cycles before relying on the gauge. Do not use low-quality chargers and never store the unit above 60°C.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 80% of the 10,440 comparable items (median $10.99).

Specifications

Product
Brand nameCameron sino
Model nameBissell ICONpet Cordless 2288 Maxisys MS906TS MS906S MS906BT MS906TS
Part numberSkullcandy MLP4670B1P
Product typeLithium polymer
Power
Battery typeLithium polymer
Battery capacity10,000 mAh
Battery voltage rating3.7 V
In the box
Battery pack size114.86 × 70.1 × 9.5

Questions about this item

What are the exact dimensions of the MLP4670B1P battery for the Maxisys MS906TS?

The battery measures 114.86 x 70.10 x 9.50 mm and weighs 169.4 g, matching the original pack size for the Maxisys MS906BT, MS906TS, MS906S and MS906TS scanners.

Which step do installers most often miss when fitting this 10000mAh pack into a Maxisys MS906BT?

The connector must be fully seated and locked before closing the case; a loose plug causes the scanner to reject the new battery even though the voltage and capacity are correct.

After how many full charge cycles will the 3.70 V lithium polymer cell reach its rated 10000mAh capacity?

The manufacturer states the cell delivers its best performance after 2 or 3 complete charge and discharge cycles when first installed.

More in Household Batteries & Chargers

Similar items