We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack 52 by 28 millimetres, 6500mAh 3.6V, light grey plastic casing with label

Cameron Sino Nickel-Zinc Battery 6500mAh 3.6V for DAITEM D8000 D8101 DP8105F

SKU CH-APQM-6BA48

Nickel-zinc replacement battery delivering 6500mAh at 3.6V for DAITEM alarm panels including D8000, D8101 and DP8105F models

  • Battery pack size52 × 28
  • Battery typeNickel zinc
  • Battery capacity6,500 mAh
  • Battery voltage rating3.6 V
  • Details52 × 28
  • Product typeNickel zinc
  • Compatible with DAITEM D8000, D8101, DP8105F and many more models
  • 6500mAh nickel-zinc chemistry delivers 23.40Wh for long runtime
  • 6V output matches original specification for safe operation
  • Compact 52.00 x 28.00mm size fits existing battery compartment
  • Certified to ISO9001, RoHS and CE standards for quality assurance

Nickel-zinc replacement battery for DAITEM alarms

This nickel-zinc cell delivers 6500 mAh at 3.6 V and fits a long list of DAITEM control panels including D8000, D8101, D8102, D8105, D8106, D8200, D8620, D8621, D8900, DP8000, DP8105, DP8105F, DP8106, DP8106F, DP8111, DP8111F, DP8200, DP8201, DP8202, DP8211F, DP8212F, DP8260F, DP8620F, DP8620X, DP8621F, DP8622F, DP8622X. It replaces original part numbers such as 63706, 80110102, BAL3, BAT01, BATLi01, BATO1, D8900 and FAS 890.

Practical limits of the nickel-zinc chemistry

The pack measures 52.00 mm by 28.00 mm and supplies 23.40 Wh of energy. Nickel-zinc cells operate at a fixed 3.6 V nominal voltage, so the alarm panel must be designed for that voltage and not for a different chemistry. A new cell reaches full capacity after two or three complete charge and discharge cycles. Do not expose the battery to temperatures above 60 °C (140 °F) and never disassemble or incinerate it.

What to verify on your existing setup

Confirm the exact model number printed on your DAITEM panel and cross-reference it with the compatible list above. Check that the original battery carries one of the listed part numbers and that the connector layout matches the 52.00 mm by 28.00 mm form factor. Ensure the panel’s charging circuit is intended for nickel-zinc chemistry and avoid using low-quality third-party chargers that can shorten service life.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $12.99
Pricier than about 60% of the 10,440 comparable items (median $10.99).

Specifications

Product
Brand nameCameron Sion
Model nameABB Stotz S&J FAS 8900 DAITEM D8900 D8106 D8105 D8102 D8101 D8200 D8621 D8620 D8000 DP8622X DP8622F DP8621F DP8620X DP8620F DP8260F
Part numberDAITEM BATLi01 BAL3 63706 BAT01 BATO1 FAS 890 D8900 80110102 PCL956361
Product typeNickel zinc
Power
Battery typeNickel zinc
Battery capacity6,500 mAh
Battery voltage rating3.6 V
In the box
Battery pack size52 × 28

Questions about this item

Should I pick the 6500mAh version or a lower capacity for my DAITEM alarm panel?

The 6500mAh capacity is the single option listed for this nickel-zinc pack. It replaces the original BATLi01 and BAL3 cells used across the D8000, D8101 and DP8105F series, so there is no lower-capacity alternative to choose.

What runtime does the 23.40Wh rating give in a DAITEM D8000 panel?

At 3.6V the pack stores 23.40Wh. A typical DAITEM control unit draws a few milliamps on standby, so the battery can maintain the system for many hours during a mains outage before the low-voltage alert triggers.

Does the nickel-zinc chemistry need a special charger or will the panel's built-in circuit handle it?

The pack includes a fully decoded chip that communicates with the DAITEM panel's existing charge circuit. No external charger or firmware change is required; the panel manages the 3.6V nickel-zinc cells exactly as it did the original battery.

More in Household Batteries & Chargers

Similar items