Chronomite SR-15L/120 HTR-I Instant-Flow Electric Tankless Water Heater
Instant-Flow electric tankless heater provides 1.5 gpm at 120 V for commercial or residential hand-washing sinks
- Instant hot water at 1.5 gpm maximum flow rate
- Activates at low 0.35 gpm for faucet efficiency
- Compact 6.25 x 9.63 x 2.75 in fits tight spaces
- 1,800 W at 120 V draws only 15 A
- Delivers 140–160 °F for commercial hand-washing
Compact Electric Tankless Heater
The Chronomite SR-15L/120 HTR-I is a wall-mounted electric tankless water heater designed for indoor use in commercial and residential settings. It delivers hot water on demand for hospitality sinks and manual hand-washing faucets without the footprint of a storage tank.
Suits Low-Flow Hand-Washing Points
This unit suits installations needing a maximum flow of 1.5 gpm activated from 0.35 gpm, delivering temperatures between 140 and 160 degrees F. It is not for high-volume fixtures, multi-outlet supply, or sites lacking a dedicated 15 A circuit at 120 V AC.
15 Amp Single-Phase Power Draw
The heater operates on a single-phase 120 V AC supply drawing 15 A for a 1,800 W power consumption. This electrical requirement is the primary constraint; verify the branch circuit capacity before purchase.
How it compares
Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.
- Price $205.99
- Pricier than about 87% of the 1,499 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | CHRONOMITE LABS |
| Product type | Other |
Questions about this item
What wall space and cold-water inlet does the 6.25 in high by 9.63 in wide unit require?
The heater measures 6.25 in tall, 9.63 in wide and 2.75 in deep, and connects to a 3/8 in cold inlet. No adjustable thermostat is fitted.
Which electrical circuit and flow rate must be present before the 15 A heater will activate?
Provide a 120 V AC single-phase circuit rated for 15 A and 1,800 W, then open the tap to at least .35 gpm; the unit starts instantly and delivers up to 1.5 gpm.
How often should the inlet screen be cleaned to maintain the 1.5 gpm maximum flow?
Inspect and clean the inlet screen every six months, or sooner if flow drops below 1.5 gpm, to prevent debris from restricting the .35 gpm activation threshold.
More in Bath Accessories & Soap Dispensers
Similar items
Milwaukee Valve 2974-M 2" Flanged Cast Iron Swing Check Valve bathware
- 2 in (5.08 cm)
Broan-NuTone, LLC 413023 Black Non-Ducted Range Hood
- Space Savers
ASCO Power Technologies 302313 Valve Rebuild Kit for 8223G021 8223G023
- Runner





