Chronomite SR-15L/277 HTR-I Electric Tankless Water Heater 80
Electric tankless water heater for undersink use delivering 1.5 gpm at 277 V with a 0.35 gpm activation threshold and factory-set output between 140 and 160 °F
- Delivers instant hot water at 1.5 gpm maximum flow rate
- Activates automatically with only 0.35 gpm minimum flow activation
- Provides precise temperature control between 140 and 160 degrees Fahrenheit
- Fits tight spaces with compact 6.25 by 9.63 by 2.75 inch dimensions
- Operates on standard 277 volt single-phase commercial power supply
Undersink electric tankless heater
The Chronomite SR-15L/277 HTR-I is a compact electric tankless water heater designed for undersink installation. It operates on a 277V AC single-phase supply and delivers hot water on demand for commercial or residential hospitality sinks and manual hand-washing faucets. The unit measures 6.25 inches high, 9.63 inches wide and 2.75 inches deep.
Suited for single low-flow fixtures
This model suits installations that need instantaneous hot water at a single lavatory or hand-washing station with a flow demand up to 1.5 gpm. It is not for buyers who need higher flow rates for showers or multiple simultaneous outlets, or for sites without a 277V electrical service.
1.5 gpm maximum flow rate
The heater activates at a minimum flow of 0.35 gpm and provides a maximum flow rate of 1.5 gpm. Delivered water temperature is factory-set between 140 and 160 degrees Fahrenheit with no adjustable thermostat. The unit draws 15 amps at 4,150 watts.
How it compares
Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.
- Price $218.99
- Pricier than about 88% of the 1,499 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | CHRONOMITE LABS |
| Product type | Other |
Questions about this item
What size cold-water inlet does the SR-15L/277 HTR-I need for connection?
The unit uses a 3/8 in cold inlet, so supply lines or fittings must match that diameter.
How is the heater mounted and what wiring step is often missed?
It installs undersink with a 15 A, 277 V single-phase circuit; the step frequently missed is confirming the breaker and wire gauge match the 4,150 W load before turning on power.
Which internal component will need replacement over time and what triggers it?
The heating element is the primary wear item; scale build-up from hard water at flow rates above .35 gpm gradually reduces efficiency until the element must be swapped.
More in Bath Accessories & Soap Dispensers
Similar items
Broan-NuTone, LLC 413023 Black Non-Ducted Range Hood
- Space Savers
Apollo 94ALF-100-01A 3 inch NPT brass ball valve bathware
- Traffic & Parking L…





