We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C27671 straight flute tap M10x1.50 semi-bottoming cobalt black oxide finish

Cleveland

Cleveland C27671 Straight Flute Tap M10x1.50 Semi-Bottoming

SKU CH-V0AK-BFXBG

M10 × 1.5 metric straight-flute tap in cobalt with black oxide finish, semi-bottoming design for through or blind holes, 74.61 mm overall length

  • Product typeTaps
  • M10 x 1.5 metric thread for standard holes
  • Semi-bottoming chamfer starts threads in blind holes
  • Straight flute design clears chips in through holes
  • Cobalt steel with black oxide resists wear
  • 05 mm thread length reaches required depth

Cleveland C27671 M10x1.50 Tap

The Cleveland C27671 is a straight-flute tap cut for M10x1.50 metric threads in a semi-bottoming style. It suits machinists and maintenance technicians who need to produce internal threads in through-holes or blind holes with a standard 6H fit.

Cobalt construction with black oxide

Cobalt substrate and a black oxide/nitride surface treatment resist wear and reduce galling during normal cutting speeds. The right-hand helix evacuates chips efficiently so heat and torque stay manageable in typical steel or alloy workpieces.

75 % thread drill size 8.50 mm

Prepare the hole with an 8.50 mm drill to achieve the specified 75 percent thread engagement before tapping. The 19.05 mm thread length and 74.61 mm overall length fit standard tap holders and allow reach in moderately deep holes without requiring specialised tooling.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 68% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND
Product typeTaps

Questions about this item

How do I install the M10x1.50 tap correctly and what step is commonly missed?

Drill the hole to 8.50 mm first, then run the tap straight with cutting oil; the step often skipped is using the correct 75 percent thread drill size for a 6H fit.

What maintenance or replacement will this cobalt tap need over time?

The cutting edges will dull after repeated use; resharpen the straight flutes or replace the tap when thread quality drops or torque rises noticeably.

What limit appears first during sustained threading with this semi-bottoming tap?

Chip evacuation in the 19.05 mm thread length becomes the bottleneck, requiring frequent reversal to clear swarf and prevent tap breakage.

More in Bits, Hole Saws & Accessory Kits

Similar items