We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland M12x1.75 straight flute tap, cobalt, black oxide finish, semi-bottoming, 85.72 mm overall length

Cleveland

Cleveland C27673 Straight Flute Tap M12-1.75 Semi-Bottoming

SKU CH-W35K-YH02F

Cobalt straight-flute tap cuts M12×1.75 metric threads to 6H fit with 23.81 mm thread length and 10.30 mm drill size

  • Product typeTaps
  • Cuts M12 x 1.75 metric threads with precision
  • Semi-bottoming design reaches deeper into blind holes
  • Straight flutes clear chips efficiently in through and blind holes
  • Cobalt construction with black oxide resists wear and heat
  • 81 mm thread length on 85.72 mm overall for standard reach

Cleveland M12×1.75 Straight Flute Tap

This Cleveland C27673 tap cuts M12 threads with a 1.75 mm pitch. The semi-bottoming design reaches deep into blind holes. Cobalt construction with black oxide and nitride coating resists wear. Right-hand cutting suits standard metric fasteners.

Suited for maintenance

Machinists creating new M12×1.75 threads in through or blind holes will find the 23.81 mm thread length effective. The D6 limit and 6H class of fit meet standard tolerance requirements. Builders needing a taper or plug chamfer for easier starting should select a different tap style.

10.30 mm drill size for 75 percent thread engagement

Preparing the hole with a 10.30 mm drill produces the recommended 75 percent thread depth before tapping. This single dimension determines whether the tap will cut correctly in your material..verify the drill size matches your workpiece before starting.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $25.99
Typical for this category: the median of 5,493 items is $27.99.

Specifications

Product
Brand nameCLEVELAND
Product typeTaps

Questions about this item

What does the M12-1.75 thread size mean when I use this tap in a workpiece?

It cuts a metric M12 thread with a 1.75 mm pitch, producing a 6H class of fit when drilled with the recommended 10.30 mm drill.

What does the D6 thread limit and 6H class of fit cap in practice?

The D6 limit and 6H fit define the allowable pitch-diameter tolerance so the finished thread meets standard metric 6H gauge requirements.

What hole depth and shank clearance does the 85.72 mm overall length and 23.81 mm thread length require?

The 23.81 mm thread length sets the maximum full-thread depth, while the 85.72 mm overall length determines the shank clearance needed in your holder or chuck.

More in Bits, Hole Saws & Accessory Kits

Similar items