We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C40014 1.25 in roughing end mill, uncoated powdered metal, Weldon flat shank

Cleveland

Cleveland C40014 1.25 in Roughing End Mill

SKU CH-0911-HMEJX

Roughing end mill with 1.25 in milling diameter, 6 in length of cut and 8 1/2 in overall length

  • 25 in milling diameter removes material fast
  • Powdered metal substrate resists wear during heavy cuts
  • Three-flute design clears chips efficiently in deep slots
  • Weldon flat shank locks securely in standard holders
  • 8 1/2 in overall length reaches deep cavities

Cleveland C40014 Roughing End Mill

The Cleveland C40014 is a 1.25 in roughing end mill built from powdered metal HSS-E with three flutes. It suits machinists removing large volumes of material in steel, stainless steel and high-temperature alloys where a fine finish is not required.

Check shank fit and tool holder capacity

Verify that your tool holder accepts a 1 1/4 in Weldon flat shank and that the machine spindle provides enough clearance for an 8 1/2 in overall length. Ensure the 6 in length of cut matches the depth of your roughing passes.

Powdered metal construction and Weldon flat mounting

The uncoated PM+ substrate resists wear and chipping during heavy chip loads. The Weldon flat locks securely in a set-screw holder, preventing pull-out during aggressive roughing while allowing quick tool changes on the shop floor.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $256.99
Pricier than about 90% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND

Questions about this item

Does the Cleveland C40014 end mill come with any holders or collets, or must they be purchased separately?

The tool is supplied as a single 1.25 in roughing end mill with a Weldon flat; compatible holders or collets are sold separately.

When should I choose this 1.25 in diameter roughing end mill over other sizes?

Select the 1.25 in diameter when your operation requires that specific milling width and a 6 in length of cut on a 1 1/4 in shank.

What does the 6 in length of cut mean for actual machining?

It allows up to 6 in of axial material removal in a single pass, limited by machine rigidity and coolant access.

More in Bits, Hole Saws & Accessory Kits

Similar items