We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland M10x1.5 straight flute hand tap, bright uncoated high speed steel, 74.61 mm overall length

Cleveland

Cleveland C54624 Straight Flute Hand Tap M10x1.5

SKU CH-NY5E-G5HRD

M10 × 1.5 straight-flute hand tap in high-speed steel, 74.61 mm overall with 31.75 mm thread length for 6H class fit

  • Product typeTaps
  • M10 x 1.5 metric thread for standard fastening
  • Straight flute design clears chips in through holes
  • High-speed steel construction resists wear during hand tapping
  • 61 mm overall length reaches deeper threads
  • 50 mm drill size ensures 75 % thread engagement

Cleveland M10x1.5 Hand Tap — Purpose

This Cleveland C54624 straight-flute tap cuts M10 threads with a 1.5 mm pitch in through-holes or blind holes. It suits maintenance technicians, machinists and hobbyists who need to create or repair metric threads by hand.

Fit in the workshop

The 74.61 mm overall length and 31.75 mm thread length reach standard hole depths without excessive overhang. A 8.50 mm drill produces the recommended 75 percent thread engagement for the D6 limit and 6H class of fit. Bright high-speed steel resists wear in general-purpose steel and non-ferrous materials.

Upgrade path

The tap replaces worn or undersized tooling that no longer holds the 6H tolerance. Switching to this D6 limit is worthwhile when existing taps produce loose threads or when a fresh, uncoated HSS cutter restores consistent pitch diameter control.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 86% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND
Product typeTaps

Questions about this item

How deep can the M10x1.5 tap cut threads in a single pass?

The thread length is 31.75 mm, so the tap cuts up to that depth before you need to reverse and clear chips.

Does the high-speed steel tap generate excessive heat during extended hand-tapping sessions?

High-speed steel resists heat buildup well; with proper cutting fluid the tap stays cool enough for continuous use.

What drill bit must I have on hand before using this M10x1.5 tap?

A 8.50 mm drill bit is required to produce the correct 75 percent thread engagement for the M10x1.5 tap.

More in Bits, Hole Saws & Accessory Kits

Similar items