We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland straight-flute hand tap M10x1.5 bright HSS finish

Cleveland

Cleveland C54626 Straight Flute Hand Tap M10x1.5 pneumatic accessory

SKU CH-EDNX-3WREJ

A straight-flute hand tap cuts M10×1.5 metric threads in through or blind holes using high-speed steel

  • Product typeTaps
  • M10 x 1.5 metric thread fits standard holes
  • Straight flute design clears chips in through holes
  • High-speed steel resists wear for longer tool life
  • Bright finish prevents rust without coating buildup
  • 61 mm overall length reaches deep threads

M10x1.5 Straight Flute Hand Tap

The Cleveland C54626 is a straight flute hand tap designed for cutting metric M10 threads with a 1.5 mm pitch. It is intended for general-purpose threading tasks in workshop and maintenance environments. The high-speed steel construction provides durability for manual or machine-assisted tapping operations.

Capacity and thread depth

The tap has an overall length of 74.61 mm and a thread length of 31.75 mm, suitable for through holes and moderate-depth blind holes. It requires a 75 percent thread drill size of 8.50 mm for proper preparation. The D6 thread limit and 6H class of fit define the tolerance range it produces.

Upgrade from worn or undersized taps

This tap replaces dull, damaged, or incorrectly sized tooling when cutting M10x1.5 threads. The jump is worth it when existing taps no longer hold tolerance or produce clean threads in high-speed steel workpieces. It is not for buyers needing coated taps for abrasive materials or spiral-flute designs for deep blind-hole chip evacuation.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 82% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND
Product typeTaps

Questions about this item

Will the M10x1.5 tap work with the 8.50 mm drill bit I already own for the 75 percent thread?

Yes, the 75 percent thread drill size is 8.50 mm, so your existing bit matches the recommended pilot hole for this M10x1.5 tap.

How can I verify the tap is cutting a correct 6H class thread after setup?

Check the finished hole with an M10x1.5 6H go/no-go gauge; the go gauge should enter fully and the no-go gauge should not pass more than two turns.

Does the box include a tap wrench or only the C54626 straight flute tap itself?

The package contains the high-speed steel straight flute tap only; a compatible tap wrench or handle must be purchased separately.

More in Bits, Hole Saws & Accessory Kits

Similar items