We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C55338 spiral point tap plug, 3 flutes, UNC 3/4 inch 10 TPI, HSS with TiN gold finish

Cleveland

Cleveland C55338 Spiral Point Tap Plug 3 Flutes UNC 3/4 Inch 10 TPI HSS TiN

SKU CH-AN3M-65VFA

Cuts UNC threads at 10 TPI with a TiN-coated HSS spiral-point plug tap featuring three flutes for efficient chip evacuation

  • Spiral-point design pushes chips forward for cleaner through-holes
  • TiN coating on high-speed steel extends edge life in steel
  • Three flutes balance chip space and core strength
  • UNC 3/4″-10 thread fits standard coarse-pitch applications
  • H3 limit and 2B class deliver consistent fit tolerance

Thread Cutting Tool for UNC 3/4-10 Holes

The Cleveland C55338 spiral point tap creates unified coarse threads in through-holes. Its right-hand cutting direction and H3 thread limit produce a 2B class of fit. Three flutes evacuate chips ahead of the cut to reduce binding during machine or hand tapping operations.

High-Speed Steel Construction with TiN Coating

High-speed steel substrate resists wear when cutting steel and non-ferrous metals. The titanium nitride surface treatment lowers friction and extends tool life under normal cutting speeds. A 75 percent thread drill size of 16.50 mm prepares the hole for efficient chip formation and reduced torque.

Consistent Performance in Repetitive Through-Hole

The 4 1/4 inch overall length and 2 inch thread length provide reach for standard depth holes. Spiral point geometry pushes chips forward continuously during sustained production runs. This design suits repeatable through-hole work but is not intended for blind-hole applications where chips must be pulled upward.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $57.99
Pricier than about 71% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND

Questions about this item

How do I install the Cleveland C55338 tap and what step do people get wrong?

Drill the 16.50 mm hole for 75 percent thread depth, then run the tap straight with cutting fluid; the common error is drilling the wrong diameter or skipping lubrication.

What maintenance or replacement will the Cleveland C55338 tap need later?

The TiN-coated HSS flutes dull over time; replace the tap when threads show tear-out or torque rises sharply — resharpening is possible but rarely economical.

What limit shows up first under sustained use of the Cleveland C55338 tap?

Heat buildup in the 3-flute HSS body limits continuous cutting speed; the TiN coating delays wear, but excessive RPM or insufficient coolant causes premature edge failure.

More in Bits, Hole Saws & Accessory Kits

Similar items