We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland spiral point tap, gold TiCN finish, three flutes

Cleveland

Cleveland C55387 Spiral Point Tap 1/4"-28 UNF 3 Flutes TiCN

SKU CH-95GM-H1CQB

Creates 1/4"-28 UNF threads in through-holes with a spiral-point design that pushes chips forward, three flutes for stability, and a TiCN coating on high-speed steel for extended wear resistance

  • Creates precise UNF threads with 1/4"-28 sizing
  • TiCN coating extends tool life in tough materials
  • Spiral point design pushes chips forward for clean holes
  • Three flutes balance strength and chip clearance
  • H2 limit ensures Class 2B fit accuracy

Cleveland Spiral Point Tap 1/4"-28 UNF

This Cleveland spiral point tap cuts unified fine threads in a 1/4"-28 size. It is designed for through-hole tapping in a range of materials. The TiCN coating adds wear resistance for longer tool life. Right-hand cutting direction suits standard threading operations.

High-speed steel construction with three flutes

The high-speed steel body provides the hardness needed for repetitive threading tasks. Three flutes allow chips to be pushed forward and out of the hole, reducing clogging. A 75 percent thread drill size of 5.45 mm prepares the correct pilot hole. The H2 thread limit produces a class 2B fit for standard assemblies.

TiCN coating sustains cutting edges under load

During extended production runs the titanium carbonitride layer reduces friction and heat buildup at the cutting edges. This helps maintain thread accuracy over many holes compared with uncoated taps. The 1 inch thread length and 2 1/2 inch overall length give adequate reach for typical through-hole depths. Builders needing larger diameters or different pitch standards will require a separate tap.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 80% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND

Questions about this item

What thread limit does the H2 class of fit reach before the tap starts to bind in sustained threading?

The H2 limit with a 2B class of fit is designed to cut threads within the specified tolerance range for 1/4"-28 UNF holes.

How much heat builds up in the TiCN-coated flutes when the tap runs continuously in steel?

The TiCN coating on the high-speed steel flutes reduces friction and heat generation during extended tapping operations.

Which drill size must I already have to prepare the 75 percent thread hole for this tap?

A 5.45 mm drill is required to produce the correct 75 percent thread depth before tapping.

More in Bits, Hole Saws & Accessory Kits

Similar items