We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bright uncoated steel spiral point tap M10x1.5 with three flutes

Cleveland

Cleveland C57189 Spiral Point Tap M10x1.5 3 Flutes

SKU CH-FDRM-ZSVVX

Metric M10 x 1.5 spiral-point tap with three flutes, 74.61 mm overall length and 31.75 mm thread length for through-hole threading

  • Cuts M10×1.5 metric threads cleanly with spiral-point design
  • High-speed steel body resists wear during repeated tapping operations
  • Three-flute geometry evacuates chips ahead of the cut
  • 75 mm thread length suits standard through-hole depths
  • Bright uncoated finish allows easy visual inspection of cutting edges

Cleveland M10 × 1.5 Spiral-Point Tap

The Cleveland C57189 is a high-speed steel spiral-point tap cut for M10 × 1.5 metric threads. It has an overall length of 74.61 mm and a 31.75 mm thread length with three flutes. The bright uncoated finish suits general-purpose threading in through holes. Right-hand threads follow standard rotation.

For through-hole threading in steel or cast iron

This tap matches a 6H class of fit and a D6 thread limit, requiring a 75 percent thread drill size of 8.50 mm. It is not for blind holes where chip evacuation needs a spiral-flute design, nor for left-hand thread requirements. Buyers who need coated tool life or different tolerance classes should look at other options.

M10 × 1.5 thread size with D6 limit

The single specification that decides fit is the M10 × 1.5 thread size combined with the D6 thread limit and 6H class of fit. Verify the workpiece material and hole type against these limits before ordering.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 82% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND

Questions about this item

How do I install the M10x1.5 spiral point tap and what step is often missed?

Use an 8.50 mm drill for the 75 percent thread hole, then run the tap right-hand to the 31.75 mm thread length; the step often missed is clearing chips every few turns to prevent binding.

What maintenance or replacement will this high-speed steel tap need later?

The bright uncoated flutes will dull with use; resharpen or replace the tap once thread quality drops or cutting torque rises noticeably.

What limit appears first during sustained tapping with this D6 class 6H tool?

Chip evacuation in deep holes becomes the limiting factor as the 74.61 mm overall length fills with swarf, increasing torque and risk of breakage.

More in Bits, Hole Saws & Accessory Kits

Similar items