We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C60021 4-flute carbide square end mill, uncoated finish

Cleveland

Cleveland C60021 4-Flute Carbide HP VI Square Single End Mill

SKU CH-BPNE-G8CWK

A 4-flute carbide square end mill with a 0.3125 in diameter and 0.5 in length of cut for general milling applications

  • Product typeMilling
  • 4-flute carbide construction extends tool life in milling operations
  • 3125 in cutting diameter matches precise machining requirements
  • 5 in length of cut enables deeper material removal per pass
  • 2 in overall length provides stable reach for standard milling setups
  • 5/16 in shank diameter fits common tool holders directly

Cleveland C60021 4-Flute Carbide End Mill

This Cleveland C60021 is a square end mill designed for milling operations. It features a carbide construction with four flutes and an uncoated finish. The tool suits machinists and fabricators working with a range of materials.

0.3125 in diameter milling upgrade

The cutter replaces smaller or worn tooling when a 0.3125 in milling diameter is required. Its 0.5 in length of cut and 2 in overall length provide the reach for deeper features. The jump is worth it when the shank diameter must match a 5/16 in holder.

Carbide tool capacity and headroom

The solid carbide body handles general-purpose milling with rigidity and wear resistance. The straight shank and non-coolant-through design fit standard tool holders. It runs out when a coated or coolant-through tool is needed for high-heat or high-volume production.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $27.99
Typical for this category: the median of 5,493 items is $27.99.

Specifications

Product
Brand nameCLEVELAND
Product typeMilling

Questions about this item

What shank diameter does the C60021 end mill need for a tool holder?

The cutter has a 5/16 in shank diameter, so it fits a standard 5/16 in collet or end-mill holder.

How do you install the carbide end mill without damaging the flutes?

Insert the shank fully into the collet, tighten the collet nut to the holder's rated torque, and avoid tapping the cutting edges during seating.

When should the uncoated carbide end mill be replaced?

Replace it when the cutting edges show visible wear, chipping, or when surface finish and dimensional accuracy degrade during milling.

More in Bits, Hole Saws & Accessory Kits

Similar items