We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland 3-flute carbide square end mill, 0.3125 inch diameter, uncoated finish

Cleveland

Cleveland C60626 3-Flute Carbide Square End Mill 0.3125 in

SKU CH-FP2A-9ESR2

A 3-flute carbide square end mill with a .3125 in milling diameter, 2.125 in length of cut, and 5/16 in shank for aluminium machining

  • Product typeMilling
  • 3-flute design clears chips fast in aluminium
  • 3125 in cutting diameter for precise slots
  • 125 in length of cut reaches deep features
  • Uncoated carbide resists built-up edge on soft metals
  • 5/16 in shank fits standard collets directly

Cleveland C60626 end mill for aluminium

The Cleveland C60626 is a solid-carbide square end mill with three flutes designed for aluminium and non-ferrous materials. Its uncoated geometry and polished flutes promote chip evacuation and reduce built-up edge during high-speed milling operations.

Upgrade from coated or general-purpose tools

Switching to this uncoated, high-helix design is worthwhile when machining aluminium alloys where coatings increase friction or trap chips. The sharp cutting edges and generous flute volume deliver cleaner finishes and longer tool life in sticky, gummy materials compared with standard coated cutters.

Verify shank size and machine rigidity

Confirm the 5/16 inch shank matches your tool holder or collet specification before ordering. Ensure the spindle provides sufficient run-out control and rigidity to exploit the 2.125 inch length of cut without excessive deflection or chatter.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $38.99
Pricier than about 61% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND
Product typeMilling

Questions about this item

What collet or holder size matches the 5/16 in shank on this end mill?

Use a 5/16 in collet or end-mill holder; the straight shank has no flats, so tighten evenly to avoid run-out.

How deep can I plunge with the 2.125 in length of cut?

The 2.125 in flute length is the maximum depth for a single pass; for deeper slots step down in multiple passes to clear chips.

When should I replace this uncoated carbide tool?

Replace when the cutting edges show rounding, chipping or when surface finish on aluminium degrades; regrinding can restore geometry once or twice.

More in Bits, Hole Saws & Accessory Kits

Similar items