We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C61914 4-flute carbide square end mill .75 in diameter 1.5 in length of cut

Cleveland

Cleveland C61914 4-Flute Carbide Square End Mill .75 in 1.5 in

SKU CH-1SQZ-RSZS7

A 4-flute carbide square end mill with a .75 in diameter and 1.5 in length of cut for general-purpose milling

  • Product typeMilling
  • 4-flute carbide design enables efficient multi-directional milling
  • .75 in diameter suits medium-scale machining tasks
  • 5 in length of cut allows deeper single-pass cuts
  • Uncoated carbide surface performs well on non-ferrous materials
  • 3/4 in shank diameter fits standard tool holders

Cleveland C61914 Square End Mill

The Cleveland C61914 is a 4-flute carbide square end mill with a 0.75 inch milling diameter and 1.5 inch length of cut. It is intended for general-purpose milling operations where a solid carbide tool provides rigidity and wear resistance. The uncoated finish suits standard machining tasks in a variety of materials. This tool is for machinists and maintenance teams needing a reliable single-end cutter.

Check shank diameter and tool holder capacity

Verify that your tool holder or collet accepts a 3/4 inch shank diameter before ordering. The overall length is 4 inches so confirm your machine spindle clearance and work envelope can accommodate this reach. Ensure your CNC or manual mill can run carbide tooling at appropriate speeds and feeds for the material you are cutting. No coolant-through passages are present on this tool.

Uncoated carbide allows flexible coating choices

The uncoated carbide substrate lets you apply a custom coating later if your application demands specific heat or wear properties. Being non-coolant-through means you must rely on external flood or mist coolant delivery for chip evacuation and temperature control. The straight shank design fits standard holders without needing specialised adapters. These attributes keep the tool adaptable across different shop setups.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $97.99
Pricier than about 82% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND
Product typeMilling

Questions about this item

Does the Cleveland C61914 end mill come individually or in a pack, and are tool holders included?

The Cleveland C61914 is supplied as a single 4-flute carbide square end mill. Tool holders or collets are not included and must be sourced separately to match your machine's spindle.

Should I choose the .75 in diameter with 1.5 in length of cut or a different size for general purpose milling?

Select the .75 in milling diameter and 1.5 in length of cut when your operation requires that specific reach and width of cut. Other diameters or flute lengths suit different profiling or slotting needs.

How does the 1.5 in length of cut perform in a standard milling setup with 4 in overall length?

The 1.5 in length of cut on a 4 in overall length tool provides rigidity for medium-depth slots and profiles. The solid carbide construction and uncoated finish suit general-purpose machining in steel and non-ferrous materials.

More in Bits, Hole Saws & Accessory Kits

Similar items