We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C80565 5-flute carbide square end mill, .5 in diameter, TiAlN coated, 1.25 in cut length, 3 in overall, 1/2 in shank

Cleveland

Cleveland C80565 5-Flute Carbide HP Square Single End Mill

SKU CH-1A36-CJZAB

A 5-flute carbide square end mill with TiAlN coating for ferrous materials, featuring a .5 in milling diameter, 1.25 in length of cut and 3 in overall length

  • Product typeMilling
  • 5-flute carbide design for efficient ferrous material cutting
  • TiAlN coating extends tool life in high-speed milling
  • .5 inch diameter suits precision machining tasks
  • 25 inch length of cut enables deeper profiling passes
  • 3 inch overall length provides rigid reach for stable operation

Cleveland C80565 5-Flute Carbide End Mill

The Cleveland C80565 is a 5-flute carbide square end mill designed for machining ferrous materials. Its TiAlN coating supports high-performance cutting in demanding applications. This tool suits machinists and fabricators requiring precise slotting or profiling in steel and iron alloys. The 0.5 inch milling diameter and straight shank fit standard holders.

Installing the .5 in shank end mill

Secure the 1/2 inch straight shank firmly in a compatible collet or end mill holder to prevent runout. Ensure the tool holder is clean and rated for the cutting forces generated by a 5-flute carbide geometry. A common issue is insufficient clamping pressure leading to tool pull-out or vibration during heavy cuts. Verify machine spindle rigidity matches the tool specifications.

Check setup before ordering C80565

Confirm your machine accepts a 1/2 inch shank diameter and provides adequate clearance for the 3 inch overall length. The 1.25 inch length of cut determines maximum depth per pass in a single operation. This tool is non-coolant through, so external flood or mist coolant delivery must reach the cutting zone effectively. Ensure workpiece material is ferrous as intended for this geometry.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $49.99
Pricier than about 67% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND
Product typeMilling

Questions about this item

How can I confirm the 1.25 in length of cut is performing correctly after setup?

Measure the cut depth on a test piece of ferrous material; it should match the 1.25 in length of cut without chatter or excessive tool wear.

What comes in the package and do I need a separate tool holder?

The box contains the single 0.5 in diameter carbide end mill with TiAlN coating; a compatible 1/2 in shank tool holder or collet must be sourced separately.

When should I choose the C80565 over other flute counts or coatings?

Select this 5-flute TiAlN-coated carbide mill for high-performance finishing in ferrous materials where the 1.25 in cut length and 3 in overall length suit your setup.

More in Bits, Hole Saws & Accessory Kits

Similar items