We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland spiral point tap M10x1.25 cobalt TiAlN 100mm overall length 3 flutes

Cleveland

Cleveland C86142 Spiral Point Tap M10x1.25 100mm Cobalt TiAlN 3 Flutes

SKU CH-JF2N-A70X5

Metric M10 × 1.25 spiral-point tap with 100 mm overall length, 40 mm thread length, three-flute cobalt body and TiAlN coating for right-hand threading

  • M10×1.25 metric threads fit standard holes
  • Spiral-point design pushes chips ahead for smoother tapping
  • Cobalt substrate with TiAlN coating resists wear in tough alloys
  • 100 mm overall length reaches deeper work areas
  • Three flutes balance strength and chip clearance

Cleveland M10x1.25 Spiral Point Tap

The Cleveland C86142 is a right-hand spiral point tap for cutting M10x1.25 metric threads in through holes. Its cobalt substrate with TiAlN coating suits production threading in steel and stainless alloys where tool life matters. The 100 mm overall length and 40 mm thread length reach deep features without extension tooling. Three flutes evacuate chips ahead of the cut to reduce torque.

Thermals noise and power draw

Hand tapping generates negligible heat and noise; machine tapping runs cool with flood or mist coolant because the spiral point pushes chips forward. Cobalt retains hardness at elevated cutting temperatures so the tool does not soften during sustained cuts. Power draw depends entirely on the machine spindle and feed rate, not on the tap itself.

Replaces worn HSS taps in high-volume M10 jobs

The jump is worth it when standard high-speed steel taps dull quickly in stainless or alloy steel, forcing frequent tool changes. The TiAlN coating and cobalt base extend intervals between resharpening. It is not for blind holes, left-hand threads, or thread sizes other than M10x1.25.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $32.99
Pricier than about 55% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND

Questions about this item

How do I install the Cleveland C86142 M10x1.25 tap and what step is often missed?

Drill the hole to the 0.3438 in size for 75 percent thread, then run the 100 mm cobalt tap with cutting fluid; the step often missed is using the correct drill diameter before tapping.

What maintenance or replacement will the Cleveland C86142 tap need over time?

The TiAlN coating on the cobalt flutes resists wear, but the cutting edges will dull after repeated M10x1.25 threads; replace the tap when thread quality drops or torque rises sharply.

What limit appears first when using the Cleveland C86142 tap continuously?

Heat buildup in the 40 mm thread length is the first limit during sustained tapping; the cobalt substrate handles temperature well, but excessive speed without coolant will degrade the TiAlN coating fastest.

More in Bits, Hole Saws & Accessory Kits

Similar items