We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C96013 spiral point tap plug #12-28 UNF cobalt finish three flutes

Cleveland

Cleveland C96013 Spiral Point Tap Plug #12-28 UNF 3 Flutes Cobalt

SKU CH-3XXP-BETX3

Cuts #12-28 UNF threads in hard materials using cobalt steel with Hard Lube coating

  • Spiral-point design pushes chips ahead for smooth through-hole tapping
  • Cobalt construction with Hard Lube coating resists wear in tough materials
  • Three flutes provide balanced cutting and efficient chip evacuation
  • #12-28 UNF thread with 2B class of fit ensures precise assembly
  • 75 % thread drill size 4.60 mm simplifies hole preparation

Threading Tool for #12-28 UNF

The Cleveland C96013 is a spiral point tap plug designed to cut #12-28 UNF threads. It features a cobalt construction with Hard Lube coating for wear resistance. The right-hand cutting tool has three flutes and a 2B class of fit.

Suited for Through-Hole Work

Machinists creating internal threads in through-holes will benefit from the spiral point design that pushes chips forward. It is not intended for blind-hole applications where chips must be pulled out. Buyers needing a different thread size or pitch should select an alternative tap.

Cobalt Material and Hard Lube Coating

The cobalt substrate provides higher heat resistance than standard high-speed steel for longer tool life. The Hard Lube coating reduces friction during tapping operations. These features combine to improve thread quality and extend the usable life of the tap in demanding materials.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 70% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND

Questions about this item

What thread size and pitch does the C96013 tap require for the pre-drilled hole?

The tap cuts a #12-28 UNF thread and specifies a 75 percent thread drill size of 4.60 mm for the pilot hole.

Will the 3-flute cobalt tap still cut cleanly in a manual tap wrench if I keep my older hand tools?

Yes, the right-hand spiral point design pushes chips ahead in through-holes and works with standard tap wrenches or powered holders.

How can I verify the C96013 is producing the correct Class 2B fit after tapping?

Check the finished thread with a #12-28 UNF 2B go/no-go gauge; the go gauge should enter fully and the no-go gauge should not.

More in Bits, Hole Saws & Accessory Kits

Similar items