We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round adjustable threading die, bright steel finish, M10 by 1.5 thread

Cleveland Golf

Cleveland Golf C65824 M10x1.5 pneumatic accessory

SKU CH-DWK0-E8BX7 MPN C65824

Adjustable HSS round die cuts M10×1.5 right-hand threads with a 25.40 mm outside diameter and 9.52 mm thickness

  • Product typeDies & Taps
  • Main materialHigh speed steel
  • M10 x 1.5 metric thread cuts standard-size holes
  • High-speed steel construction resists wear during repeated use
  • Adjustable die design allows precise thread fit control
  • 40 mm outside diameter fits common die stocks
  • Right-hand thread direction matches most fastener applications

M10 × 1.5 threading die

This Cleveland Golf C65824 die cuts M10 × 1.5 metric threads in a single pass. The round die measures 25.40 mm outside diameter and 9.52 mm thick for standard die-stock fit. High-speed steel construction resists wear when threading mild steel and similar materials. Right-hand thread direction suits the majority of fastener applications.

Heat and power in use

High-speed steel retains hardness at the temperatures generated by hand or low-speed machine threading. Cutting fluid reduces friction and keeps the die cool during extended cuts. No external power source is required; the tool is driven by a manual die stock or compatible power tapper. Uncoated bright finish allows lubricant to cling evenly across the cutting faces.

Supplied accessory impact

The die ships as a single piece with no additional taps, guides or lubricant in the package. Users must supply a suitable die stock or holder matched to the 25.40 mm outside diameter. Proper alignment and steady pressure prevent chipped threads and extend die life. Adjustable design permits slight diameter compensation for fit-class requirements.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $30.99
Typical for this category: the median of 5,493 items is $27.99.

Specifications

Product
Brand nameCleveland
Model nameC65824
Product typeDies & Taps
Size & build
Main materialHigh speed steel

Questions about this item

How do I install the M10x1.5 adjustable die in a 25.40 mm die stock, and what step is often missed?

Insert the die with the marked side facing out, tighten the stock screws evenly, then use the adjustment screw to set the thread fit before cutting; skipping the pre-adjustment produces oversize threads.

What maintenance will the high speed steel M10x1.5 die need after repeated use?

Clean chips from the flutes after each job, apply light machine oil to prevent rust, and resharpen or replace the die when the 1.50 mm pitch threads show rounding or require excessive force.

What limit appears first when cutting M10x1.5 threads continuously with this uncoated die?

Heat buildup in the high speed steel causes the cutting edges to lose hardness fastest, so pause frequently and use cutting fluid to delay wear on the 9.52 mm thick die body.

More in Bits, Hole Saws & Accessory Kits

Similar items