We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cobalt end mill, TiCN finish, four flutes, 3/8 inch diameter

Cleveland Golf

Cleveland Golf Cobalt End Mill 3/8 4FL TiCN

SKU CH-660M-2DC8Y

Cobalt end mill with TiCN coating cuts stainless steel, titanium and high-tensile alloys up to 55 HrC

  • Product typeHole, Drill, Bore & Wire Gauges
  • TiCN coating resists wear on hard alloys
  • Four-flute design improves chip clearance
  • 30° helix angle balances cutting forces
  • Centre-cutting square end enables plunge milling
  • Suitable for 40–55 HRC steels and titanium alloys

Cobalt end mill for high-tensile alloys

The Cleveland Golf Cobalt End Mill is a four-flute, single-end cutter with TiCN coating. It is designed for peripheral milling on cobalt, nickel, austenitic alloys, stainless steel and titanium alloys. The tool suits general-purpose machining where workpieces reach 40 to 55 HrC hardness.

Fractional-inch shank limits holder options

The cutter uses a 3/8 inch fractional-inch shank and diameter. This restricts use to tool holders and collets that accept that exact size. The 30-degree helix angle and right-hand cutting direction are fixed by the design, so the tool cannot be adapted for left-hand operations or different helix requirements.

3/4 inch cut length defines reach

The length of cut is 3/4 inch within an overall length of 2-1/2 inches. This provides adequate engagement for shallow pockets and peripheral passes on the listed materials. Deeper cavities or full-slot cuts beyond the flute length will require a longer tool or multiple setups.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 58% of the 2,474 comparable items (median $23.99).

Specifications

Product
Brand nameCleveland
Product typeHole, Drill, Bore & Wire Gauges

Questions about this item

Should I pick a 4-flute end mill like this one for my application?

The four-flute design with TiCN coating suits peripheral milling on cobalt, nickel, austenitic alloys, high-tensile steels between 40 and 55 HrC, stainless steel and titanium alloys.

How does the 30-degree helix angle affect chip evacuation in steel?

A 30-degree helix gives a balanced rake for moderate chip loads, helping clear material without excessive tool deflection in the listed steel and alloy groups.

What does the TiCN coating limit in terms of cutting speed?

TiCN raises hardness and heat resistance versus uncoated cobalt, letting you run higher surface speeds on the specified alloys while reducing built-up edge.

More in Utility & Specialty Hand Tools

Similar items