We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bright high-speed steel end mill, two flutes, square end, center cutting

Cleveland Golf

Cleveland Golf End Mill HSS 1 in 2 Flute Single End Square Center Cutting 30 Deg

SKU CH-GMSG-PVXTP

A 1-inch high-speed steel end mill with two flutes, single square end, center-cutting geometry and 30-degree helix for plunge cutting, peripheral milling and deep slotting

  • Product typeHole, Drill, Bore & Wire Gauges
  • High-speed steel construction resists wear during general-purpose milling
  • Two-flute design clears chips efficiently in deep slots and pockets
  • Center-cutting geometry allows direct plunge cuts into the workpiece
  • Single-end square profile creates flat-bottom features with sharp corners
  • Bright finish reduces friction and helps prevent built-up edge

End Mill HSS 1 Inch 2 Flute

This end mill is a standard general-purpose tool made from high speed steel with a bright finish. It features a single end with a square profile and center cutting design. The tool has a 1 inch cutting diameter and a 3/4 inch shank diameter. It is intended for plunge cutting, peripheral milling, deep slotting and pocketing operations.

Right Hand Cut 30 Degree Helix

The right hand cut configuration with 30 degree helix angles on both radial and axial planes provides consistent chip evacuation during milling. A single end design means the cutting geometry is concentrated on one end of the tool. The high speed steel construction offers toughness suitable for a range of workpiece materials in general machining applications.

General Purpose Machining Limits

High speed steel tools like this end mill are practical for general purpose milling but have lower heat resistance than carbide alternatives. The tool is restricted from sale in certain states as noted by the supplier. Buyers needing higher cutting speeds or extended tool life in abrasive materials should evaluate carbide options instead.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $54.99
Pricier than about 75% of the 2,474 comparable items (median $23.99).

Specifications

Product
Brand nameCleveland
Product typeHole, Drill, Bore & Wire Gauges

Questions about this item

What does the 30-degree helix angle mean for chip evacuation?

The 30-degree helix angle balances chip evacuation and tool rigidity for general-purpose milling in steel and non-ferrous materials.

What are the shank and cutting diameters required for toolholder clearance?

The cutting diameter is 1 inch and the shank diameter is 3/4 inch, so the holder must accommodate a 3/4-inch shank with at least 1-inch clearance for the flutes.

How do I set up this center-cutting end mill for a plunge cut?

Use the center-cutting geometry to plunge directly into the workpiece at reduced feed, then transition to peripheral milling or slotting once full depth is reached.

More in Utility & Specialty Hand Tools

Similar items