We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six thin amber polyimide heater strips, 45 by 100 mm, with adhesive backing

Coliao 6 pcs 45x100 mm 24 V 30 W Polyimide Heater Adhesive

SKU CH-XTA3-ATF90

Six adhesive polyimide heater strips, each 45 mm by 100 mm, run on 24 V DC at 30 W and reach up to 170 °C

  • Key features45mmx100 mm, Coliao
  • Six heaters per pack for multi-zone heating
  • 24 V 30 W each for consistent power
  • Self-adhesive backing for fast surface mounting
  • Ultra-thin polyimide film under .4 mm
  • Operating range -190 °C to 205 °C

Polyimide heater film for 24 V systems

This pack contains six adhesive polyimide heating elements sized 45 mm by 100 mm. Each film runs on 24 V DC and delivers 30 W of heat. The thin construction suits electronics manufacturing, scientific instruments and similar applications where a flexible, low-profile heater is required.

Thermal behaviour and power draw

The heater reaches a maximum surface temperature of about 170 °C and operates across a range of -190 °C to 205 °C. The polyimide insulation provides high thermal efficiency and stable resistance during normal use. A separate 24 V temperature controller is needed because the film cannot regulate its own temperature.

Self-adhesive mounting and durability

Each element includes a pressure-sensitive adhesive backing rated above 40 N per 100 mm for secure attachment. The high-temperature, high-pressure sealing process gives a wire tensile strength exceeding 5 N. The ultra-thin profile of less than 0.4 mm allows the film to conform to curved or flat surfaces without adding bulk.

How it compares

Measured against everything we stock in Adhesives, Glues & Cleaners, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 66% of the 74 comparable items (median $14.99).

Specifications

Product
Brand nameColiao

Questions about this item

How do I install the 45x100 mm polyimide heater and what step do people miss?

Clean the mounting surface thoroughly, peel the self-adhesive backing, and press firmly so the >40 N/100 mm adhesive bonds; the missed step is skipping surface prep, which causes the heater to lift under thermal cycling.

What maintenance or replacement will the 24 V 30 W heater need later?

The polyimide film is rated for long service life with high insulation strength; no routine maintenance is required, but replace the pad if the adhesive fails or the element shows physical damage after extended use.

What limit appears first when the 30 W film runs continuously at 24 V?

The maximum heating temperature of 170 °C is reached first; the heater cannot self-regulate, so a 24 V temperature controller must be used to prevent exceeding this limit.

More in Adhesives, Glues & Cleaners

Similar items