We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black tower CPU cooler with 120 mm ARGB fan, black aluminium top cover and four black heat pipes

Cooler Master

Cooler Master Hyper 212 Halo Black CPU Cooler RR-S4KK-20PA-R1

SKU CH-0ECZ-5EAQN MPN RR-S4KK-20PA-R1

Compact 154 mm air cooler with four black heat pipes, a 120 mm MF120 Halo² fan running 650–2050 RPM at 27 dB(A) and dual-loop ARGB lighting

  • Fan size120 mm
  • Supported CPU socketsAMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA
  • Bearing designRifle
  • Rotational speed650 to 2,050 RPM ± 10%
  • Airflow rate88.14 m³/h (51.88 CFM)
  • Operating noise27 dB(A)

Model Hyper 212 Halo Black

  • Dual-loop ARGB lighting adds visual flair
  • 27 dB(A) operation keeps the system quiet
  • 14 m³/h airflow improves thermal headroom
  • 154 mm height fits most mainstream cases
  • Simplified brackets speed up installation on AM5 and LGA 1700

Compact 154mm height for broad chassis fit

The Cooler Master Hyper 212 Halo Black is an air cooler built around four jet-black copper heat pipes and a single 120mm MF120 Halo² fan. It targets builders who want quiet thermal headroom for mainstream processors on Intel LGA 1700, LGA 1851, LGA 1200 or AMD AM5 and AM4 platforms. The 154mm overall height keeps it clear of most side panels and memory modules.

Rifle-bearing fan holds steady airflow at 2050 RPM

Under sustained load the 120mm fan spins between 650 and 2050 RPM, moving up to 88.14 m³/h while the rifle bearing keeps acoustic output at 27 dB(A). The dual-loop ARGB ring runs independently of the PWM curve, so lighting stays consistent even when the fan ramps down during lighter workloads. Four direct-contact pipes spread heat across the aluminium fin stack without relying on a vapour chamber.

Verify 154mm clearance and a 4-pin PWM header

Before ordering, confirm your case allows at least 154mm of cooler height and that the motherboard provides a standard 4-pin CPU fan header for PWM control. The ARGB function needs a 3-pin 5V addressable header or the included controller for automatic spectrum mode. Builders needing liquid-cooling density or silent operation below 20 dB(A) should look elsewhere.

How it compares

Measured against everything we stock in CPU Coolers & Heatsink Fans, at today’s prices. Recalculated every night.

Price $25.99
Pricier than about 72% of the 1,559 comparable items (median $19.99).
Fan size 120 mm
Higher than about 80% of the 812 comparable items (median 80 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCOOLER MASTER
Model nameHyper 212 Halo Black
Part numberRR-S4KK-20PA-R1
Product colorBlack
Product typeFan & Heatsinks
Performance
Rotational speed650 to 2,050 RPM ± 10%
Airflow rate88.14 m³/h (51.88 CFM)
Power
Power input connector4 Pin
Size & build
Fan size120 mm
Bearing designRifle
Cooler materialAluminum
Fan mountingVertical
Shipping weight0.84 kg
Package size191 × 140 × 109 mm
Compatibility
Supported CPU socketsAMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 1851
CPU cooler height limit154 mm
Environment & compliance
Operating noise27 dB(A)

Other versions of this model

4 more in the same range

Questions about this item

How loud is the MF120 Halo² fan when the CPU runs at full load all day?

The fan reaches 27 dB(A) at its 2050 RPM maximum, so sustained heavy workloads stay at a low, office-friendly noise level.

Does my motherboard need a specific header to run the ARGB lighting on this cooler?

The ARGB auto-detection works with a standard 3-pin 5 V ARGB header; if that header is absent the fan defaults to a built-in spectrum cycle.

Will the 154 mm height fit inside a mid-tower case that also holds an ATX motherboard with tall VRM heatsinks?

At 154 mm tall the cooler clears most mid-tower interiors, and the upgraded brackets keep it clear of VRM heatsinks on LGA 1700, LGA 1851 and AM5 boards.

More in CPU Coolers & Heatsink Fans

Similar items