We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three square black 120 mm case fans with metallic hubs, anti-vibration corners and PWM cables

COUGAR

COUGAR MHP120 KIT 120 mm case fan 3-pack

SKU CH-CSCW-02JTB

Three 120 mm hydraulic-bearing PWM fans deliver up to 82.48 CFM airflow and 4.24 mm H₂O static pressure for radiator or case cooling

  • Fan size120 mm
  • Number of fans3 Fans
  • Fan controlNo Controller
  • Fan depth25 mm
  • Bearing designHydraulic Bearing
  • Rotational speed600-2,000 RPM +/- 200 RPM

Model 3 Packs

  • High static pressure of 4.24 mm H₂O for dense radiators
  • Hydraulic bearing and PWM control give quiet 600–2000 RPM range
  • Metallic-reinforced hub and shell increase structural rigidity
  • Anti-vibration dampers and low-noise adaptors reduce transmitted noise
  • Three-fan kit includes extension cables and screw kit for quick install

Three-fan kit for high-static-pressure cooling

The COUGAR MHP120 KIT supplies three 120 mm case fans built around a hydraulic bearing and a metallic-reinforced motor hub. Each unit runs at 12 VDC and draws 0.23 A through a standard 4-pin PWM connector. The pack includes 300 mm extension cables, 100 mm low-noise adaptors and a screw kit for straightforward installation.

Static pressure of 4.24 mm H₂O for dense fin stacks

The single figure that determines fit for purpose is the rated air pressure of 4.24 mm H₂O ±10 %. This level targets radiators and restrictive mesh where airflow alone is insufficient. Buyers who need high volume through open grilles rather than pressure through fins should look elsewhere.

Sustained 2000 RPM with hydraulic bearing durability

At full PWM duty the fans hold 2000 RPM ±200 RPM, delivering 82.48 CFM ±10 % at a maximum of 41.2 dB(A). The hydraulic bearing and reinforced shell are engineered to maintain that speed continuously without the wear spike seen in sleeve designs. Power draw stays at 2.76 W per fan under load.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $45.99
Pricier than about 88% of the 8,339 comparable items (median $19.99).
Fan size 120 mm
Typical for this category: the median of 1,114 items is 120 mm.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCougar
Model nameMHP120 KIT
Product typeCase Fan
Performance
Rotational speed600-2,000 RPM +/- 200 RPM
Airflow rate82.48 CFM +/- 10%
Power
Power input connector4 Pin PWM
Size & build
Fan size120 mm
Number of fans3 Fans
Fan depth25 mm
Bearing designHydraulic Bearing
Product dimensions120 × 120 × 25 mm
In the box
In the box3 x MHP120
3 × 300 mm Extension Cable
3 × 100 mm Low-Noise Adaptor
Fan Screw Kit
User Manual
Environment & compliance
Operating noise41.2 dB(A) (Max.)
More details
Fan controlNo Controller

Other versions of this model

1 more in the same range

Questions about this item

What does the 2000 RPM top speed actually deliver inside a case?

At maximum speed the fans move 82.48 CFM with 4.24 mm H2O static pressure, suited for radiators or restrictive meshes.

How does the 4-pin PWM connector limit or enable speed control?

The 4-pin PWM header lets the motherboard vary voltage from 600 to 2000 RPM automatically based on temperature curves.

What clearance and mounting hardware do the 120 mm frames need?

Each fan is 120 x 120 x 25 mm and the box includes a screw kit plus 300 mm extension cables for flexible routing.

More in PC Cooling Fans

Similar items