CRC 14051 Cutting Oil 1 gal hardware

Cutting Oil for Metalworking

CRC 14051 Cutting Oil is a thread cutting lubricant supplied in a one-gallon jug. It is formulated for machining tasks such as drilling, reaming, sawing, shearing, tapping, threading and turning. The dark amber fluid uses petroleum distillates to reduce friction and heat during metal removal operations. Machinists and maintenance technicians use it to extend tool life and improve cut quality.

Simple Application and Common Issues

The jug allows direct pouring or brushing onto the workpiece and cutting tool before or during the operation. No special equipment is required to apply the lubricant. Problems usually arise when the fluid is not reapplied frequently enough during heavy cuts, leading to excessive tool wear or poor surface finish. Using the oil on unsuitable materials or neglecting proper chip evacuation can also reduce its effectiveness.

Compatibility and Workplace Checks

Verify that petroleum-based cutting fluids are permitted in your facility and comply with local environmental regulations. Confirm the workpiece material is compatible with distillate-based lubricants to avoid staining or corrosion. Ensure you have appropriate storage for a one-gallon container and personal protective equipment such as gloves and eye protection for handling. Check that your machining process generates chips that can be cleared while the fluid is present.