We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U metal rackmount PDU with LCD display and dual NEMA L6-20P input cords

CyberPower

CyberPower PDU24006 Metered ATS PDU 1U Rackmount 2x NEMA L6-20P 8x C13 2x C19

SKU CH-30YC-4074Q MPN PDU24006

Metered ATS PDU distributes 200–240 VAC power through eight C13 and two C19 outlets with dual NEMA L6-20P inputs and selectable LCD monitoring

  • Rack height1U
  • Supply voltage240 – 200 VAC
  • Input line frequency50 Hz – 60 Hz
  • Input current rating20A
  • Input connectionStraight (Socket) 2 x NEMA L6-20P
  • Cord length10 ft (3.0 m)
  • Automatic transfer switching ensures continuous power redundancy
  • Metered LCD display provides real-time load monitoring
  • Dual NEMA L6-20P inputs enable redundant power feeds
  • Ten C13 and C19 outlets support mixed-density rack gear
  • One-U metal chassis fits standard 19-inch racks

1U Metered ATS Rackmount PDU

The CyberPower PDU24006 is a 1U rackmount power distribution unit with an automatic transfer switch and a selectable colour LCD meter. It accepts dual 200–240 VAC inputs through two NEMA L6-20P plugs on a 10 ft cord. Eight IEC-320 C13 and two IEC-320 C19 outlets deliver the same voltage to connected equipment. The metal housing includes all mounting hardware for standard racks.

Dual-Source Redundancy For Single-Cord Devices

This unit suits racks where servers or network gear have only one power supply but the site provides two independent feeds. The automatic transfer switch moves the load to the secondary source within milliseconds if the primary fails. It is not for installations that require local overload protection on each outlet branch. Facilities needing per-outlet circuit breakers or metered switching should consider a different PDU topology.

20 A Maximum Input Current

The PDU is rated for a maximum input current of 20 A across both NEMA L6-20P inlets. This single figure governs the total connected load and determines whether the unit can support a given rack population. Exceeding 20 A will trip the upstream supply, so the buyer must sum device draw before deployment.

How it compares

Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.

Price $436.99
Typical for this category: the median of 643 items is $451.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCyberPower
Product lineMetered ATS PDU
Model namePDU24006
Part numberPDU24006
Product typeMetered
Design styleRackmount
Storage
Storage elevation0 – 49213 ft (0 – 14999 m)
Power
Supply voltage240 – 200 VAC
Input line frequency50 Hz – 60 Hz
Input current rating20A
Input connectionStraight (Socket) 2 x NEMA L6-20P
Voltage output240 – 200 VAC
Output outlets8 – IEC-320 C13
2 – IEC-320 C19
Overload protectionNone
Size & build
Rack height1U
Cord length10 ft (3.0 m)
Product dimensions17.05 × 1.75 × 8.45 (in)
Product weight11 lb (4.99 kg)
Shipping weight6.35 kg
Package size550 × 398 × 124 mm
Environment & compliance
Operating conditions32 – 113 °F (0 – 45 °C)
Operating humidity0 – 95 % (non-condensing)
Operating altitude0 – 13123 ft (0 – 4000 m)
Storage temperature range5 – 131 °F (-15 – 55 °C)

Questions about this item

How can I confirm the automatic transfer switch is functioning after rack-mounting the PDU24006?

The selectable colour LCD on the front panel shows real-time input-source status and load current so you can verify the ATS switches between the two NEMA L6-20P feeds without interruption.

What ships with the PDU24006 and which cables must I source separately?

The unit includes all 1U rack-mounting hardware and a 10 ft input cord ending in 2 x NEMA L6-20P plugs; you must supply IEC C13 or C19 power cords to connect your servers to the 8 x C13 and 2 x C19 outlets.

Which capacity should I choose if my rack draws up to 20 A at 200–240 VAC?

The PDU24006 is rated for a maximum input current of 20 A, so it matches a 20 A circuit; select this model when your combined load stays within that 20 A limit.

More in Rackmount PDUs

Similar items