We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 10 oz cartridge of biscuit acrylic latex sealant

D.A.P.

D.A.P. 18519 Acrylic Latex Sealant 10 oz Cartridge Biscuit

SKU CH-VHP3-82HAZ

Acrylic latex sealant in a 10 oz cartridge, paintable and resistant to cracks, mildew, mould and water, with low odour and VOC compliance

  • Paintable finish matches décor
  • Crack resistant for lasting seals
  • Mildew and mold resistant for wet areas
  • Waterproof protection inside and out
  • Low odour acrylic latex formula

Kitchen and bath acrylic latex sealant

This acrylic latex sealant is formulated for kitchen and bath applications where a waterproof, paintable joint is required. The biscuit colour matches common fixture tones and the low-odour formula suits interior use. It is supplied in a standard 10 oz cartridge for use with a caulking gun.

Thermals noise and power draw

The sealant performs across a temperature range from -20 degrees F to 150 degrees F once fully cured. Full cure is reached in one day, with a working time of ten minutes for tooling and smoothing. As a non-mechanical product it produces no noise and draws no power during or after application.

Cartridge format and crack resistant finish

The cartridge format fits standard caulking guns for consistent bead control on site. Cured beads remain crack resistant, mildew resistant and mould resistant in wet environments. VOC compliant formulation meets regulatory standards, and the product carries California Proposition 65 warnings for cancer and reproductive harm.

How it compares

Measured against everything we stock in Caulking & Sealing Supplies, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 90% of the 631 comparable items (median $16.99).

Specifications

Product
Brand nameDAP

Questions about this item

How do I load the 10 oz cartridge and cut the nozzle for a clean bead?

Insert the cartridge into a standard caulking gun, puncture the inner seal, then cut the nozzle tip to the bead size you need.

Will the cured sealant need to be replaced or can it be painted over later?

It stays flexible and resists cracking, mildew and mold; the biscuit finish can be painted after the 1-day full cure.

At what temperature does the sealant stop performing during continuous exposure?

Maximum performance temperature is 150 °F; above that the sealant may lose adhesion and waterproofing.

More in Caulking & Sealing Supplies

Similar items