We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled silver stainless steel cable on spool

Dayton

Dayton 1/4 in Stainless Steel Cable 100 ft WLL 1152 lb

SKU CH-SGP2-76MPG

¼-inch 304 stainless-steel wire rope, 19×7 IWRC core, 100 ft length, 1,152 lb working load limit and 5,760 lbf breaking strength for lifting tasks

  • 1/4 in diameter suits compact rigging
  • 304 stainless steel resists corrosion
  • 19 x 7 strand construction balances flexibility and strength
  • 1152 lb working load limit for lifting tasks
  • 100 ft length covers extended runs

Stainless Steel Cable for Lifting

This 1/4 in diameter cable is made from 304 stainless steel and supplied in a 100 ft length. It is designed for lifting and pulling tasks where corrosion resistance matters. The working load limit is 1152 lb with a breaking strength of 5760 lbf.

IWRC Core and Plain Ends

The rope uses a 19 x 7 strand classification with an independent wire rope core for structural stability. It is unlubricated and uncoated, leaving a plain silver finish. Both ends are plain cut, so termination hardware must be added before use.

Proposition 65 Compliance Notice

California Proposition 65 warnings apply because the product contains chemicals known to cause cancer and reproductive harm. Buyers needing food-grade or medically certified wire rope should verify suitability separately. No fittings, thimbles or lubrication are included in the bundle.

How it compares

Measured against everything we stock in Lifting & Material Handling, at today’s prices. Recalculated every night.

Price $179.99
Pricier than about 87% of the 1,558 comparable items (median $34.99).

Specifications

Product
Brand nameDayton

Questions about this item

What Working Load Limit does the 1/4 inch stainless steel cable support?

The cable has a Working Load Limit of 1152 lb and a breaking strength of 5760 lbf, so it is rated for lifting loads up to 1152 lb under normal use.

What diameter and length must the mounting hardware accommodate?

The cable measures 1/4 inch in diameter and comes in a 100 ft length, so any sheaves, clamps or terminations must fit that size.

How is the plain-end 19x7 IWRC wire rope terminated, and what mistake should be avoided?

The ends are plain with no factory fittings; install proper stainless-steel sleeves or clips matched to 1/4 inch 19x7 construction and torque them to spec — do not use undersized or mismatched hardware.

More in Lifting & Material Handling

Similar items