We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 12V DC permanent magnet motor 56C frame transparent finish

Dayton

Dayton 108920.00 12V DC Permanent Magnet Motor 56C

SKU CH-YREH-HDJ6T

12V DC permanent-magnet motor delivers 1/2 HP at 800 RPM with 4.4 in-lb torque

  • Product colorTransparent
  • Continuous duty cycle supports non-stop operation
  • Totally enclosed non-ventilated enclosure protects internals
  • 12V DC input enables battery-powered use
  • 4 in-lb full-load torque delivers strong turning force
  • 56C face/base mounting fits standard frames

DC Permanent Magnet Motor 12V

The Dayton 108920.00 is a 12V DC permanent magnet motor built to a 56C frame for face or base mounting. It delivers 1/2 HP at 800 RPM nameplate speed with a full-load torque of 4.4 in-lb. The motor draws 39.0 A at full load and operates on a continuous duty cycle. It suits equipment builders needing a compact, enclosed drive unit.

Totally enclosed nonventilated enclosure

The totally enclosed nonventilated design keeps dust and moisture out of the windings without external airflow. Class H insulation allows a maximum ambient temperature of 40 °C, while the lack of thermal protection means the installer must provide external overload safeguards. External brushes simplify inspection and replacement during scheduled maintenance. Ball bearings and a 5/8 in shaft diameter complete the mechanical interface.

39.0 A full-load current

A 39.0 A draw at 12 V DC dictates the wire gauge, fuse rating and power-supply capacity required for safe operation. Builders must verify that their DC source can sustain this current continuously without excessive voltage drop. The 56C face mounting pattern and 1 7/8 in shaft length determine mechanical compatibility with driven equipment. Units needing a different voltage, frame size or lower current will not match this motor.

How it compares

Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.

Price $645.99
Pricier than about 91% of the 1,762 comparable items (median $45.99).

Specifications

Product
Brand nameDAYTON
Product colorTransparent

Questions about this item

How often do the external brushes on the Dayton 108920.00 need replacement?

External brushes are accessible for inspection and replacement; service interval depends on load and duty cycle, but the motor is rated for continuous operation at 40 °C ambient.

What thermal limit stops the motor first during sustained full-load runs?

The insulation class H and 40 °C maximum ambient temperature define the thermal ceiling; no internal thermal protection is fitted, so winding temperature must stay within class H limits.

How much heat and noise does the totally enclosed non-ventilated frame produce at 39 A continuous?

The TENV enclosure relies on surface convection, so the frame runs warm at 39 A full-load current; audible noise is limited to bearing and brush contact without a cooling fan.

More in Heating & Cooling Controllers

Similar items