We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel utility pump with 1 1/4 inch discharge outlet

Dayton

Dayton 11C686 1/3 HP 115 V Utility Pump

SKU CH-WZ3A-N9QSX MPN 11C686

A 1/3 HP stainless-steel utility pump moves up to 76 gpm at 5 ft head and 29 gpm at 20 ft, reaching 32 ft maximum head on 115 V power

  • Product typeDrain Components
  • 1/3 HP motor delivers 76 gpm at 5 ft head
  • Stainless steel body and impeller resist corrosion
  • 115 V plug-in design simplifies installation
  • Maximum 32 ft head handles demanding drainage
  • 18 in minimum sump pit fits standard basins

Dayton 1/3 HP Utility Pump

This Dayton 11C686 utility pump delivers 1/3 horsepower at 115 volts for residential drainage tasks. The stainless steel body and impeller resist corrosion while moving water through a 1-1/4 inch female threaded discharge. It operates on standard 120V AC household current at 60 Hz and draws 7.50 amps during operation.

Plug-in drainage solution

The pump requires a grounded 120V outlet and a discharge pipe connected to the 1-1/4 inch F fitting. A minimum sump pit diameter of 18 inches and 12 inches of water depth are needed for proper operation. No switch is included so a separate float or pressure switch must be supplied to automate the pump cycle.

Flow performance under head

At 5 feet of head the pump moves 76 gpm, decreasing to 59 gpm at 10 feet and 45 gpm at 15 feet of head. At 20 feet of head the flow rate is 29 gpm before reaching a maximum shut-off head of 32 feet. The Buna-N, ceramic and stainless steel shaft seal is designed for continuous immersion in typical drainage water.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $266.99
Pricier than about 88% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDayton
Model name11C686
Product typeDrain Components

Questions about this item

How much head can this 1/3 HP pump actually push against before flow stops?

Maximum head is 32 ft; at 20 ft of head it still delivers 29 gpm.

What are the amp draw and motor construction when the pump runs continuously?

It draws 7.50 A at 120 V AC and uses a stainless-steel body, stainless-steel impeller and Buna-N/ceramic/stainless-steel shaft seal.

What size sump pit and water depth are required before this plug-in pump will operate?

Minimum sump diameter is 18 in and minimum water depth is 12 in.

More in Drain Stoppers, Strainers & Traps

Similar items