Dayton 1A580 Brass Solenoid Valve Trap 1 1/4 in Normally Closed 250 psi 16 Cv
Brass solenoid valve body, normally closed, 1 1/4 in pipe, 16 Cv, 250 psi max pressure, 180 °F fluid temperature
- Product typeDrain Components
- Brass body resists corrosion for long service life
- Normally closed design stops flow when power is lost
- 16 Cv rating handles high-volume liquid or gas flow
- Operates up to 250 psi for demanding pressure applications
- Suitable for indoor and outdoor installation environments
Brass Solenoid Valve Trap 1 1/4 in
The Dayton 1A580 is a brass solenoid valve trap designed for drain and trap applications. It features a 1 1/4 inch nominal pipe size with a 2-way, normally closed configuration and a 16 Cv flow coefficient. The valve body is rated for a maximum fluid temperature of 180 Degrees F.
Suits indoor or outdoor drain lines needing 250
This valve suits plumbing systems requiring a normally closed solenoid for air, inert gas, or water service up to 250 psi differential pressure. It is not for buyers who need an integrated coil or a lower minimum operating pressure differential than 5 psi. The Proposition 65 warning applies for California installations.
Verify pipe size, pressure range
Before ordering, confirm your system uses 1 1/4 inch piping and operates within the 5 to 250 psi differential range. Ensure the fluid temperature does not exceed 180 Degrees F. Check that your separate coil matches the valve body specifications for voltage and environmental rating.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $269.99
- Pricier than about 88% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dayton |
| Model name | 1A580 |
| Product type | Drain Components |
Questions about this item
What size pipe and coil voltage do I need to match this 1 1/4 in normally-closed brass body?
The valve body has a 1 1/4 in nominal pipe size and 1 1/4 in orifice; it is sold without a coil, so you must supply a compatible 2-way solenoid coil separately.
Will the 5 psi minimum pressure differential work with my existing low-pressure air line?
The valve requires at least 5 psi differential to open and handles up to 250 psi for air, inert gas or water, so your line must stay above 5 psi during operation.
How can I verify the 16 Cv flow rating is achieved after installation?
With the correct coil energised, measure flow at your operating pressure; a 16 Cv rating means 16 US gallons per minute of water at 1 psi pressure drop across the 1 1/4 in orifice.
More in Drain Stoppers, Strainers & Traps
Similar items
Red Hat
Red Hat 8215G010 Solenoid Valve 2-Way 3/8 in NPTF 120V AC 0-50 psi
- Drain Components
$271.99
0.00332547BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017105BTC
In stock