We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt, 960 mm length, 120 teeth, 50 mm wide

Dayton

Dayton 1LVT4 Gearbelt HT 120 Teeth 960 mm

SKU CH-YPAQ-DDZ69

Neoprene timing belt with 120 teeth, 960 mm pitch length, 50 mm wide, rated from -22 to 194 °F

  • Product typeBearings, V-belts & Power Transmission Equipment
  • Product colorBlack
  • Precise 8 mm pitch ensures accurate timing
  • 120 teeth on 960 mm loop match drive specs
  • Neoprene body with fiberglass cord resists stretch
  • Nylon tooth coating cuts friction and wear
  • Rated from -22 to 194 °F for harsh environments

Industrial Timing Belt for Power Transmission

The Dayton 1LVT4 is a Synchro-Link HT timing belt built for general industrial machinery. Its neoprene body with nylon tooth coating and fiberglass reinforcement handles oil, heat and continuous load in fixed-centre drives. The closed-loop design suits conveyors, packaging equipment and automation systems that demand precise synchronous motion without lubrication.

960 mm Pitch Length with 120 Teeth on 8 mm Pitch

This single dimension decides fit: the belt runs exactly 960 mm pitch length with 120 teeth spaced at 8 mm HTD profile. The 50 mm top width matches the pulley groove, and the 194 °F maximum and -22 °F minimum operating temperatures define the thermal window. Verify pulley tooth count and centre distance before ordering; no stretch allowance exists.

Slip Over Pulleys and Tension to Spec

Installation is a simple loop-over onto matched HTD pulleys, then tension to the drive designer's specification using a tension gauge or deflection method. Common errors are twisting the belt during fitment, running on mismatched or worn pulley profiles, and over-tensioning which fractures the fiberglass cords. Keep the belt clean and avoid oil saturation beyond its rated resistance.

How it compares

Measured against everything we stock in Fan Collectibles & Memorabilia, at today’s prices. Recalculated every night.

Price $66.99
Pricier than about 82% of the 1,367 comparable items (median $26.99).

Specifications

Product
Brand nameDAYTON
Product typeBearings, V-belts & Power Transmission Equipment
Product colorBlack

Questions about this item

How does the 960 mm pitch length translate once the belt is tensioned on a drive?

The 960 mm pitch length is the effective circumference at the cord line; under proper tension the belt runs at that length on matching 8 mm pitch pulleys.

What does the 8 mm HTD pitch limit in terms of pulley selection and torque capacity?

The 8 mm HTD pitch requires pulleys with the same 8 mm tooth spacing and curvilinear profile, which together determine the maximum transmittable torque for the 50 mm width.

What shaft centre distance and flange clearance does the 120-tooth, 50 mm wide closed loop need to fit?

The 960 mm pitch length sets the nominal centre distance for a given pulley pair, while the 50 mm top width demands flanges or guides spaced to accommodate that full belt width.

More in Fan Collectibles & Memorabilia

Similar items