We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round green LED indicator light with stainless steel bezel and wire leads

Dayton

Dayton 22NY50 Raised Indicator Light Green 120V 1/2in

SKU CH-98EA-8QPG8

A raised panel LED indicator with a nylon body, polycarbonate lens and stainless-steel bezel for 120 V AC/DC panels

  • Brand nameDAYTON
  • Engine size1/2 in Mounting dia
  • Green LED visibility with raised panel design
  • 120 V AC/DC operation suits industrial panels
  • 1/2 in mounting diameter fits standard cut-outs
  • 25 000-hour average life reduces replacement frequency
  • IP40 rating protects against solid particles

Raised Indicator Light, Green, 120 V

The Dayton 22NY50 is a raised panel indicator with a green LED, a nylon body and a polycarbonate lens protected by a stainless-steel bezel. It mounts in a 1/2 inch hole and connects through 6 inch wire leads for 120 V AC or DC supply.

Capacity and headroom

The lamp draws 4.16 mA and is rated for an average life of 25,000 hours. It fits panels between 0.030 and 0.093 inch thick and carries a UL listing, but its IP40 rating means it is not sealed against water ingress.

1/2 inch mounting diameter

This dimension decides whether the part fits the panel cut-out. The light is restricted from sale in California because it contains a chemical known to the state to cause cancer and reproductive harm.

How it compares

Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 85% of the 677 comparable items (median $33.99).

Specifications

Product
Brand nameDAYTON
Size & build
Engine size1/2 in Mounting dia

Questions about this item

Will the 1/2 in mounting diameter fit the existing panel cut-out I already have?

The light mounts in a 1/2 in diameter hole and accepts panel thicknesses from 0.030 in to 0.093 in.

How can I confirm the green LED is operating correctly once installed?

Apply 120 V AC or DC; the green LED should illuminate and draw about 4.16 mA.

Does the package include any mounting hardware or connectors, or do I need to supply them?

The unit comes with 6 in wire leads for electrical connection; mounting hardware and connectors are not included.

More in Bench & DC Power Supplies

Similar items