We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 24EN98 time delay relay, octal 8-pin, enclosed body, 1.7 in depth

Dayton

Dayton 24EN98 Time Delay Relay On Delay 12V DPDT 10A 0.01-1s Octal 8-Pin

SKU CH-Z8WH-5FWK7

Plug-in 12 V DC on-delay relay with DPDT 10 A contacts and 0.01-1 s adjustment

  • Precise 0.01-second minimum delay for fine timing control
  • On-delay function suits motor start and sequencing tasks
  • 12 V DC coil voltage matches common control circuits
  • DPDT contacts rated 10 A at 240 V AC or 30 V DC
  • Octal 8-pin plug-in base enables quick socket mounting

Single-Function On-Delay Relay

The Dayton 24EN98 is a single-function on-delay time relay designed for 12V DC control circuits. It mounts in an octal 8-pin socket and provides a DPDT contact arrangement rated at 10 A. The enclosed body carries an IP20 rating and measures 1.7 in deep.

Suited to Short Fixed Delays

This unit suits panels that need a single adjustable on-delay between 0.01 sec and 1 sec. It is not for applications requiring multiple timing functions, longer delay ranges, off-delay or interval modes, or a different coil voltage.

10 A Switching with Narrow Time Window

The DPDT contacts switch up to 10 A at 240V AC or 30V DC, giving ample headroom for typical pilot-duty and small-load circuits. The potentiometer adjustment covers only the 0.01 sec to 1 sec span, so any sequence needing delays beyond one second will require a different relay.

How it compares

Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.

Price $37.99
Cheaper than about 68% of the 1,098 comparable items (median $61.99).

Specifications

Product
Brand nameDAYTON

Questions about this item

Does the 12 V DC coil require a separate power supply or can it share the load circuit?

The relay coil operates on 12 V DC input voltage, so a compatible 12 V DC source must be present; it does not draw power from the switched load circuit.

Can the DPDT contacts switch both 240 V AC and 30 V DC loads at the same 10 A rating?

Yes, the contact form is DPDT rated 10 A at 240 V AC and 10 A at 30 V DC, allowing either type of load within those limits.

How do I verify the on-delay timing is set correctly between 0.01 s and 1 s?

Adjust the potentiometer, apply coil voltage, and measure the interval until the contacts change state; it should match the desired setting within the 0.01 s to 1 s range.

More in Contactors, Relays & Motor Starters

Similar items