We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel solenoid valve body, quarter inch NPT, two way normally closed

Dayton

Dayton 2A195 1/4 in Stainless Steel Solenoid Valve Trap

SKU CH-ETVZ-BXD6E MPN 2A195

A normally-closed stainless steel solenoid valve body with a 1/4 in port, .34 Cv flow and 150 psi pressure rating for water or air up to 180 °F

  • Product typeDrain Components
  • Stainless steel body resists corrosion in harsh environments
  • Normally closed design stops flow until energised for safety
  • 1/4 in pipe size fits standard plumbing connections
  • Operates up to 150 psi with air or water
  • Handles fluid temperatures up to 180 Degrees F

Valve Body for 1/4 in Piping

The Dayton 2A195 is a two-way, normally-closed solenoid valve body machined from stainless steel for 1/4 in nominal pipe connections. It handles air, inert gas or water at pressures up to 150 psi and fluid temperatures to 180 Degrees F. The body carries a .34 Cv rating through a 1/8 in orifice and is rated for corrosive, indoor and outdoor environments.

Suits Direct-Acting Control Loops

Installers building or servicing direct-acting shut-off circuits for clean fluids will find the pressure and temperature range appropriate. The valve requires a separate coil to operate and is not intended for pilot-operated or high-flow applications. Buyers who need an integrated coil assembly or larger flow capacity should look at other configurations.

Threaded Body Mounts In-Line

The 1/4 in threaded ports allow straight in-line installation into existing pipework without special tools. Because the coil is sold separately, the most common issue is selecting a coil with the wrong voltage, wattage or enclosure rating for the intended environment. Verify coil specifications against the valve body before wiring.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $55.99
Pricier than about 65% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDayton
Model name2A195
Product typeDrain Components

Questions about this item

What coil voltage and type must I already have to operate this normally closed 1/4 in stainless steel valve body?

This valve body is sold less coil, so you need a compatible Dayton coil that matches your supply voltage and the 1/4 in port configuration to actuate the normally closed mechanism.

Will the 150 psi maximum pressure differential for air and water suit my existing low-pressure pneumatic lines?

Yes, the valve handles up to 150 psi differential for both air and inert gas as well as water, with a minimum of 0 psi, making it suitable for typical low-pressure pneumatic systems.

How can I confirm the valve is opening correctly after wiring the coil?

When the coil is energised, the normally closed valve should open; verify flow through the 1/8 in orifice and listen for the solenoid click, ensuring operation stays within the 180 °F fluid temperature limit.

More in Drain Stoppers, Strainers & Traps

Similar items