We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact submersible pump with plastic housing, screened intake and 20 ft cord

Dayton

Dayton 2HNN6 Submersible Pump 1/70 HP 115V 365 GPH

SKU CH-3S88-YTHEQ MPN 2HNN6

Compact submersible pump delivers up to 365 GPH at 1 ft head with a 1/70 HP epoxy-sealed motor and 20 ft cord

  • Product typeDrain Components
  • Continuous-duty operation supported by epoxy-encapsulated motor
  • Up to 365 gph flow at one foot of head
  • 5 ft maximum head for versatile placement
  • 20 ft cord length allows flexible positioning
  • 5 A draw at 115V AC keeps energy use low

Compact submersible drain pump for low-head water

The Dayton 2HNN6 is a centrifugal submersible pump rated at 1/70 hp and 115 V AC. It delivers up to 365 gph at 1 ft of head and 238 gph at 10 ft of head with a maximum lift of 12.5 ft. The epoxy-encapsulated motor runs continuously at 1.5 A and includes a 20 ft power cord.

Screened intake and small-discharge fitting

A screened intake handles debris while the 3/8 in NPT discharge suits 3/8 in pipe. The 3/4 in intake connection accepts standard hose or pipe. Plastic housing resists corrosion and the unit is compatible with oil as well as water.

Maximum 12.5 ft of head limits use to shallow

The pump cannot overcome higher vertical lifts, so it suits basement floor drains, utility sinks or aquarium circulation. Builders needing deeper lift or higher flow must select a larger unit.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $120.99
Pricier than about 80% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDayton
Model name2HNN6
Product typeDrain Components

Questions about this item

Will the epoxy-encapsulated motor need any seal replacement or internal service?

The motor is epoxy encapsulated for a permanent seal; no internal seal maintenance is required.

At what head height does the flow first drop below the 365 gph maximum?

Flow is 365 gph at 1 ft of head and falls to 308 gph at 5 ft, so the first drop appears at 5 ft.

How much current does the 1/70 hp motor draw during continuous 115 V operation?

The nameplate rating is 1.5 A at 115 V AC for continuous duty.

More in Drain Stoppers, Strainers & Traps

Similar items