Dayton 3/32 in 100 ft 184 lb 7x7 Steel Cable
100 ft of 3/32 in galvanised steel cable with a 184 lb working load limit and 920 lbf breaking strength
- Galvanized steel core resists corrosion for outdoor durability
- 184 lb working load limit handles light lifting tasks safely
- 7x7 strand construction provides flexibility for easier handling
- 100 ft length covers extended runs without splicing
- Vinyl coating adds abrasion protection and smoother operation
3/32 Inch Galvanised Steel Cable
This 100 ft length of 7x7 construction wire rope is made from galvanised steel with a vinyl coating. It carries a working load limit of 184 lb and a breaking strength of 920 lbf. The plain ends and unlubricated finish make it suitable for general lifting and pulling tasks where a coated cable is preferred.
Installation and Common Issues
The plain ends require appropriate terminals such as swaged fittings or wire rope clips to form secure loops. Ensure clips are spaced and torqued correctly to prevent slippage under load. Inspect the vinyl coating for damage before use, as cuts can trap moisture and accelerate corrosion of the galvanised steel core. Avoid sharp bends that exceed the rope’s natural flexibility.
Pre-Order Checks
Verify that the 184 lb working load limit meets the maximum force your application will impose, including dynamic loads and safety factors. Confirm the 3/32 inch diameter and 1/8 inch overall diameter with coating are compatible with your sheaves, pulleys or fairleads. Check that the operating environment stays within the unspecified temperature limits and that the vinyl coating is acceptable for the intended contact surfaces.
How it compares
Measured against everything we stock in Lifting & Material Handling, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 80% of the 1,558 comparable items (median $34.99).
Specifications
| Product | |
|---|---|
| Brand name | Dayton |
Questions about this item
How can I confirm the 7x7 galvanized steel cable is performing to its 184 lb working load limit after installation?
Apply a known test load up to 184 lb and verify the cable shows no permanent deformation or strand distortion; the 920 lbf breaking strength provides a 5:1 safety factor.
What components are included with the 100 ft vinyl-coated cable and what must be sourced separately?
The reel supplies 100 ft of 3/32 in diameter 7x7 galvanized steel cable with vinyl coating and plain-cut ends; thimbles, clips, sleeves or end fittings are not included.
Which diameter and length combination should I select for a lifting job rated at 184 lb WLL?
Choose the 3/32 in diameter by 100 ft length; it is the only variant listed with a 184 lb working load limit and 920 lbf breaking strength.
More in Lifting & Material Handling
Similar items
Baldwin 85006 4-Piece Magnetic Pickup Tool Set 15 lb 1.5 lb 20 in
- Adhesives; Enamels;…
- 15 lb (6.8 kg)
US Cargo Control JETBGV58X12 Galvanized Turnbuckle Jaw & Eye 5/8" conveying
Baldwin 350 LBS Fishing Magnet 2 Inch Neodymium Rare Earth Magnets with Lifting Eye Bolt
- Adhesives; Enamels;…
- 350 in pounds
Quantum Storage Systems QTB302CUP Replacement Bin Cup for QTB302, Clear
WORKPRO Telescoping Gas Cylinder Dust Cover Shroud S1777-1
- Adhesives; Enamels;…
- 300 lb (136 kg)





