We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal agitator air mixer with 32 inch shaft and three blade propeller

Dayton

Dayton 32V132 Agitator Air Mixer 32 in 1/2 HP 1/4 NPT

SKU CH-HT65-C03TZ

Air-powered agitator mixes 55-gallon drums with a 32-inch 316 stainless shaft, three-blade propeller at 17-degree pitch, 1/2 HP motor and 1/4 NPT inlet

  • Product typeAngle, Pitch & Slope Locators
  • Air-powered 1/2 hp motor delivers consistent mixing torque
  • 32 in 316 stainless shaft reaches full drum depth
  • Fixed three-blade 5 in propeller handles all viscosities
  • 17 degree pitch angle creates thorough top-to-bottom flow
  • 1/4 in female NPT inlet connects to standard air supply

32-inch Agitator Air Mixer for 55 gal Drums

This Dayton agitator air mixer is built for stirring contents inside standard 55 gallon drums. It mounts on top and runs on compressed air through a 1/4 NPT female inlet. The unit delivers up to one-half horsepower and reaches 2,000 RPM maximum mixing speed for consistent blending.

Air-powered motor with stainless steel shaft

The air-driven design avoids electrical hazards and keeps operating temperatures low during extended mixing cycles. A 32 inch shaft made from 316 stainless steel resists corrosion across all compatible viscosity levels. Three fixed blades with a five inch diameter and 17 degree pitch move material efficiently while noise remains typical for pneumatic agitators.

Replaces manual stirring or undersized mixers

This mixer upgrades from hand agitation or smaller shaft units that cannot reach the bottom of a full drum. The jump is worth it when batch consistency matters and compressed air is already available at the workstation. Buyers who need electric drive or variable speed control should look elsewhere.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $392.99
Pricier than about 91% of the 2,474 comparable items (median $23.99).

Specifications

Product
Brand nameDayton
Product typeAngle, Pitch & Slope Locators

Questions about this item

How do I install the 32 in shaft through the drum opening, and what step is often missed?

Lower the 316 stainless shaft through the bung, then secure the 1/4 in female NPT air inlet before pressurising; the step often missed is tightening the air connection fully so no leak develops at 2,000 RPM.

What maintenance will the 1/2 HP air motor and 316 stainless shaft need over time?

Lubricate the air motor per the manufacturer schedule, inspect the three 5 in blades for wear, and check the 1/2 in shaft for corrosion or bending after extended mixing cycles.

What limit appears first when running the mixer continuously at 2,000 RPM?

The 1/2 HP air motor reaches its maximum horsepower ceiling first, so sustained operation at 2,000 RPM is constrained by available compressed-air flow and motor thermal limits.

More in Utility & Specialty Hand Tools

Similar items