We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron pillow block bearing with alloy steel insert, double sealed, 1 15/16 in bore

Dayton

Dayton 3FCR6 Pillow Block Bearing 1 15/16 in Bore

SKU CH-BKSV-3KA1W

Cast-iron pillow-block bearing with 1 15/16 in bore, double-sealed radial ball insert and two bolt-through mount holes

  • Double-sealed closure keeps contaminants out for longer service life
  • Cast-iron housing provides rigid support for heavy-duty applications
  • Set-screw locking allows quick installation on cylindrical shafts
  • Wide -20 °F to 200 °F temperature range suits varied operating environments
  • Two bolt-through mount holes give secure, straightforward mounting

Pillow Block Bearing 1 15/16 in Bore

The Dayton 3FCR6 pillow block bearing uses a cast iron housing and alloy steel radial ball insert. It fits a cylindrical shaft of 1 15/16 in bore diameter and mounts with two bolt-through holes on 6 1/4 in centres. The unit is double sealed and pre-lubricated with NLGI #2 equivalent grease.

Double sealed closure and cast iron housing

Double seals keep contaminants out while retaining the factory grease fill. Cast iron housing provides rigid support for the bearing insert across the operating range of -20 °F to 200 °F. The fixed centre height of 2 1/4 in simplifies alignment on existing mounting surfaces.

1 15/16 in cylindrical bore

This bearing only accepts a shaft of exactly 1 15/16 in diameter with a cylindrical fit. Builders using metric shafts, different imperial sizes or tapered seats cannot use this unit. The two-hole bolt pattern also limits mounting to flat surfaces with matching hole spacing.

How it compares

Measured against everything we stock in Bearings, Belts & Drive Components, at today’s prices. Recalculated every night.

Price $66.99
Pricier than about 70% of the 693 comparable items (median $35.99).

Specifications

No published specifications for this item yet.

Questions about this item

How often must the NGLI #2 equivalent lubricant be replenished in the double-sealed bearing?

The double-sealed design retains the factory NGLI #2 equivalent grease for the bearing's service life; no routine relubrication is required.

At what temperature does the cast-iron housing reach its 200 °F maximum rating under continuous load?

The bearing is rated for continuous operation up to 200 °F; sustained loads that drive housing temperature above this limit will reduce service life.

Does the cast-iron pillow block run hot or noisy when mounted bolt-through at 6 1/4 in centres all day?

With double-sealed radial ball inserts and cast-iron housing, the unit runs quietly; housing temperature stays within the -20 °F to 200 °F range during all-day operation.

More in Bearings, Belts & Drive Components

Similar items