Dayton 3LU77 HVAC Control, 1/3 hp, 115V, 625 RPM
Direct-drive blower motor delivers 1/3 hp at 625 RPM on 115 V single-phase power
- Reliable HVAC airflow with 1/3 hp permanent split capacitor motor
- Three-speed operation at 625 RPM nameplate for flexible air delivery
- Auto thermal protection and Class B insulation for continuous duty cycles
- Resilient ring and stud mounting enables all-angle installation
- 115 V AC, 5.1 A full-load amps on 60 Hz single-phase power
Dayton 3LU77 Blower Motor, 1/3 hp
The Dayton 3LU77 is a direct-drive blower motor rated at one-third horsepower for single-phase 115 V AC supply. It runs at a nameplate speed of 625 RPM with three selectable speeds. The unit suits HVAC technicians and maintenance crews needing a replacement fan motor for continuous-duty air-handling equipment.
Three-speed operation and resilient-ring mounting
Three discrete speed taps let the installer match airflow to the system without an external controller. The resilient-ring and stud mounting isolates vibration from the housing, while the open air-over enclosure relies on the airstream for cooling. Automatic thermal protection and Class B insulation guard against overheating during continuous operation.
All-angle mounting simplifies replacement
The motor mounts in any orientation and the six-inch, half-inch-diameter shaft fits common blower wheels, so alignment is straightforward. Installers must verify the 48YZ frame dimensions and 5.1 A full-load current match the existing circuit. The 40 °C maximum ambient temperature limits use in unconditioned mechanical rooms.
How it compares
Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.
- Price $146.99
- Pricier than about 76% of the 1,762 comparable items (median $45.99).
Specifications
| Product | |
|---|---|
| Brand name | DAYTON |
Questions about this item
Will the 48YZ frame motor need bearing lubrication or replacement over time?
The motor uses sealed bearings in the 48YZ frame and does not require lubrication; bearing replacement is only needed if noise or vibration develops after extended continuous duty.
Which limit appears first when the 1/3 hp motor runs continuously at 625 RPM?
Thermal protection activates if winding temperature exceeds the Class B insulation limit at 40 °C ambient, stopping the motor before mechanical overload occurs.
How much noise and heat does the open air-over enclosure produce during all-day operation?
The open air-over design relies on the driven airflow for cooling, so motor surface temperature stays near the 40 °C ambient rating and audible noise is limited to bearing and air-rush sound at 625 RPM.
More in Heating & Cooling Controllers
Similar items
Danfoss 013G-8565 Remote Sensor and Dial 16 ft Capillary hvac control
Emerson Climate Technologies 152-10 Line Volt Mechanical Thermostat
- Gray





