We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton utility pump, plastic housing, 1 inch NPT ports

Dayton

Dayton 3YU60 1/2 HP 115V 6.5A 1 in utility pump

SKU CH-TVZY-8T6Z6 MPN 3YU60

A 1/2 HP utility pump moves up to 10.3 gpm at 5 ft of head and reaches a maximum 134 ft of head

  • Product typeDrain Components
  • Moves up to 10.3 gpm at 5 ft head for fast drainage
  • Delivers 4.2 gpm at 40 ft head for elevated discharge points
  • Reaches 134 ft maximum head to handle tall vertical runs
  • 1/2 hp motor runs on standard 115V AC single-phase power
  • 1 in NPT discharge and MNPT intake fit common plumbing connections

1/2 HP 115 V Utility Pump

This 1/2 hp utility pump runs on 115 V AC single-phase power and draws 6.5 A. It delivers a maximum flow of 10.3 gpm at 5 ft of head and maintains 4.2 gpm at 40 ft of head with a shut-off head of 134 ft. The plastic housing uses 1 in MNPT intake and 1 in NPT discharge connections.

Open dripproof motor, non-submersible design

The open dripproof motor suits dry, ventilated locations such as utility rooms or covered pits where water is removed from sumps, basins or tanks. Buyers needing a fully submersible pump for immersion in flooded areas should look at a different design. Systems requiring automatic level control will need a separate float switch.

134 ft maximum head at 4.2 gpm

The 134 ft shut-off head determines whether the pump can overcome the total vertical lift and friction loss in your piping. If the installation demands more head than this rating provides, the pump will not deliver the required flow.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $240.99
Pricier than about 87% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDayton
Model name3YU60
Product typeDrain Components

Questions about this item

Will the 1 in MNPT intake on this 1/2 hp utility pump connect to my existing 1 in discharge piping?

Yes, the pump has a 1 in MNPT intake and a 1 in NPT discharge, so it matches standard 1 in pipe fittings directly.

How can I verify the pump is performing to its rated 10.3 gpm maximum flow after installation?

With the pump running at zero head, measure the water output over one minute; you should see about 10.3 gallons if the motor and impeller are working correctly.

Does the box include the 1 in NPT discharge fitting or must I supply my own pipe adapters?

The pump body provides the 1 in NPT discharge thread; any pipe, hose or adapter to complete the connection is purchased separately.

More in Drain Stoppers, Strainers & Traps

Similar items