Dayton 3YU69 1/4 HP Submersible Sump Pump 115V AC Vertical Float
A 1/4 HP submersible sump pump with vertical float switch, 115 V AC motor and 16 gpm flow at 5 ft head
- Product typeDrain Components
- 1/4 HP motor delivers reliable water removal
- 16 gpm flow at 5 ft head handles moderate flooding
- Vertical float switch automates on/off cycling
- Polypropylene body resists corrosion in wet conditions
- 115V AC power suits standard household outlets
What this pump does
The Dayton 3YU69 is a 1/4 HP submersible sump pump that runs on 115V AC power at 60 Hz and draws 2.6 A. A vertical float switch with piggyback electrical connection turns the motor on at an 8 in water level and off at 3 1/2 in. It is built for residential basements or crawl spaces where automatic water removal is required.
Switch and flow performance
The piggyback plug lets the float switch control power without rewiring the outlet. Flow rates are 16 gpm at 5 ft of head, 11 gpm at 10 ft, and 6 gpm at 15 ft, with a maximum shut-off head of 20 ft. The polypropylene body, polyamide impeller and carbon-ceramic shaft seal handle clear water drainage duties.
Installation notes
The pump needs a sump pit at least 10 in diameter to accommodate the 8 3/4 in body and vertical float travel. A 1-1/4 in male discharge threads onto standard pipe or hose. No separate control box is required. Buyers who need higher flow at greater lift or a tethered float for wider pits should look elsewhere.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $163.99
- Pricier than about 83% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dayton |
| Model name | 3YU69 |
| Product type | Drain Components |
Questions about this item
When will the carbon and ceramic shaft seal need replacement?
The carbon-ceramic shaft seal is a wear part; plan to inspect it annually and replace if leakage appears around the motor shaft.
What head height limits continuous flow?
Maximum head is 20 ft; at 15 ft head the pump still delivers 6 gpm, but flow stops beyond 20 ft.
How hot does the motor run during all-day operation?
The 1/4 HP motor draws 2.6 A at 115 V AC and is cooled by the surrounding water in the sump pit.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC BS11001/16 Replacement Basket Trap
- Drain Components
- HAWA
Apollo 7650401A 3/4" FNPT Stainless Steel Ball Valve
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Mueller Industries D 05100P Copper Tubing 5/16" OD 100 ft Type ACR
- Drain Components





