We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel solenoid valve body, quarter inch port, normally closed, less coil

Dayton

Dayton 4A693 1/4 in Stainless Steel Solenoid Valve Body

SKU CH-JHS6-JSHZ3 MPN 4A693

Stainless steel 1/4 in solenoid valve body, normally closed, 0.56 Cv, 60 psi max pressure, 180 °F fluid limit

  • Product typeDrain Components
  • Stainless steel body resists corrosion indoors and outdoors
  • Normally closed design holds flow until energised
  • 1/4 in NPT fits standard piping without adapters
  • 56 Cv delivers consistent flow for air or water
  • Rated to 180 °F fluid temperature for hot-water service

Solenoid Valve Body for Fluid Control

The Dayton 4A693 is a stainless steel solenoid valve body designed for 2-way, 2-position fluid control in plumbing and industrial systems. It features a normally closed configuration with a 1/4 in nominal pipe size and a 3/16 in orifice diameter.

Verify Pressure and Temperature Limits Before

Confirm your system operates within a maximum fluid temperature of 180 degrees F and pressure differentials up to 60 psi for air, inert gas or water. The valve requires a minimum operating pressure differential of 0 psi and carries a Cv of 0.56 for flow calculations.

Suits Corrosive Indoor or Outdoor Environments

This valve body fits applications needing stainless steel construction rated for corrosive, indoor and outdoor use. It is not suited for systems exceeding the stated pressure or temperature limits or for configurations requiring a normally open starting position. Buyers needing an integrated coil must source that separately.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $140.99
Pricier than about 81% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDayton
Model name4A693
Product typeDrain Components

Questions about this item

Does the Dayton 4A693 valve body include the solenoid coil or must it be purchased separately?

The listing describes the item as a valve body less coil, so the solenoid coil is not included and must be sourced separately.

Which pressure rating should I use when selecting this 1/4 in stainless steel valve for air versus water lines?

Both air or inert gas and water share the same maximum operating pressure differential of 60 psi, with a minimum of 0 psi.

What flow capacity does the Cv of .56 give me in a typical 1/4 in piping system?

A Cv of .56 means the valve will pass 0.56 US gallons per minute of water with a 1 psi pressure drop across the 3/16 in orifice.

More in Drain Stoppers, Strainers & Traps

Similar items