Dayton 4A704 1/4 in Brass Solenoid Valve Trap

Brass Solenoid Valve Body

The Dayton 4A704 is a brass solenoid valve body with a quarter inch pipe connection. It operates as a three way two position valve that can be configured for different starting states. The unit is rated for indoor and outdoor environments and carries a Proposition 65 warning for chemical exposure. Builders needing a compact fluid control component will find the design straightforward to integrate.

Integration Requirements

The valve body accepts a standard quarter inch pipe fitting and operates with a minimum pressure differential of zero psi. Maximum operating pressure is forty psi for both air or inert gas and water service. Fluid temperature must not exceed one hundred eighty degrees Fahrenheit. A separate coil must be supplied to complete the assembly and the orifice diameter of three thirty seconds inch determines the flow capacity.

Coil and Flow Characteristics

The product is sold as a valve body less coil so the installer selects a coil that matches the system voltage and duty cycle. Two Cv values of point one seven and point two two are listed reflecting the configurable flow paths. This flexibility allows the same body to serve different circuit designs without changing the piping layout. The brass construction resists corrosion in typical plumbing environments.