We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron submersible sump pump, cylindrical body, discharge outlet visible

Dayton

Dayton 4HU69 1/2 HP 1-1/2" Submersible Sump Pump 120V AC

SKU CH-XD0C-FAQVS MPN 4HU69

Submersible sump pump moves up to 65 gallons per minute at five feet of head with a half-horsepower motor

  • Product typeDrain Components
  • 1/2 HP motor delivers 65 gpm at 5 ft head
  • Cast iron body and impeller resist corrosion
  • 30 ft maximum head handles deep pits
  • 8 A draw at 120 V AC fits standard circuits
  • 12 in minimum pit diameter suits common basins

Submersible Sump Pump 1/2 HP 120V AC

The Dayton 4HU69 is a submersible sump pump built for residential drainage. It operates on 120V AC power at 60 Hz and draws 6.8 amps. The cast iron body and impeller provide durability in wet environments. This unit is intended for homeowners needing automatic water removal from basements or crawl spaces.

Flow Rates at Measured Head Levels

At 5 ft of head the pump delivers 65 gpm, at 10 ft it provides 57 gpm, at 15 ft it moves 45 gpm, and at 20 ft it supplies 30 gpm. Maximum head is rated at 30 ft where flow stops completely. The carbon ceramic shaft seal resists wear during continuous operation. Performance declines steadily as discharge height increases beyond 20 ft.

Upgrade From Smaller Pumps or Manual Removal

This model replaces lower-capacity pumps or manual bailing in pits of at least 12 in diameter. The 1-1/2 in discharge handles typical residential plumbing connections. Buyers needing higher flow at greater lift or a built-in float switch should consider other options. No switch is included so separate level control is required.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $173.99
Pricier than about 83% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDayton
Model name4HU69
Product typeDrain Components

Questions about this item

Will this 1/2 HP pump fit inside my existing 12-inch diameter sump pit?

Yes, the minimum sump pit diameter is 12 in and the pump body diameter is 8 1/2 in, so it fits with clearance.

How can I verify the pump is delivering its rated 65 gpm at 5 ft of head after installation?

Measure the flow at the discharge; at 5 ft of head the pump should move 65 gpm, dropping to 57 gpm at 10 ft and 45 gpm at 15 ft.

Does the box include a float switch or do I need to buy one separately?

No switch is included — neither actuation nor electrical connection — so a separate switch must be purchased.

More in Drain Stoppers, Strainers & Traps

Similar items