We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton coolant pump brass bronze housing 3.31 inch base three foot cord

Dayton

Dayton 4JPG4 Coolant Pump 1/25 HP 115V 1.3 Amp

SKU CH-Q31H-FNPFR MPN 4JPG4

Circulates coolant at up to 7.1 gpm with a 1/25 hp motor and 7.8 ft maximum head

  • Product typeDrain Components
  • Delivers 7.1 gpm maximum water flow for rapid coolant circulation
  • Maintains 5.5 gpm at 5 ft head for consistent pressure under load
  • Brass and bronze housing resists corrosion for long service life
  • 1/25 HP motor runs on standard 115 V three-phase power
  • Handles fluids up to 500 SUS viscosity for versatile machining applications

Product Identity

The Dayton 4JPG4 is a three-phase coolant pump rated at 1/25 hp and 115 V AC with a 1.3 amp draw. It targets machine-tool operators who need a compact brass-and-bronze pump for circulating cutting fluid or similar liquids.

Installation Notes

The pump requires a three-phase 115 V supply and fits a 3/8 in NPT intake and discharge. A 3 ft cord limits placement unless extended properly. The 6 in maximum immersion depth must be observed to avoid motor damage.

Suitability

This unit suits maintenance teams running small-capacity coolant systems where 7.1 gpm open flow and 7.8 ft of head are sufficient. It is not for buyers who need higher flow rates, greater head pressure, deeper immersion or single-phase power compatibility.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $225.99
Pricier than about 86% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDayton
Model name4JPG4
Product typeDrain Components

Questions about this item

How can I verify the pump is operating correctly after installation?

Check that the flow rate reaches up to 7.1 gpm at open discharge and 5.5 gpm at 5 ft of head, with the motor drawing 1.3 amps at 115 V three-phase.

What comes in the box and what must be purchased separately?

The pump unit with 3 ft cord is included; 3/8 in NPT intake and discharge fittings, piping, and coolant fluid are not supplied.

Which capacity should I choose for a system needing 5 ft of head?

At 5 ft of head this 1/25 hp model delivers 5.5 gpm; select it if that flow meets your circulation requirement.

More in Drain Stoppers, Strainers & Traps

Similar items