Dayton 53RU57 electric drum pump aluminium 230 V AC 16 psi 47 in tube
Electric drum pump with a 47 in suction tube, self-priming operation and 16 psi maximum pressure for 230 V AC supply
- Self-priming design starts flow instantly without manual priming
- 47 in suction tube reaches deep drums for full extraction
- Variable speed control adjusts output to match task needs
- Thermal protection shuts off motor to prevent overheating
- Runs dry capability protects pump when container empties
Application fit
The Dayton 53RU57 is an electric drum pump built for 230 V AC supply and a 47 in suction tube. It suits operators transferring fluids from standard drums where a CEE 7/7 plug matches the local mains. Buyers needing a different voltage, a shorter tube or a battery-powered unit should look elsewhere.
Sustained operation
Thermal protection allows the motor to run continuously without tripping on extended transfers. The self-priming design maintains flow after pauses, and the pump runs dry without damage. Maximum head and outlet pressure are rated at 16 psi, with oil flow up to 7 gpm under load.
Installation notes
A bung adapter is included for direct drum mounting and the 6 ft discharge hose connects to the 1 in hose barb. The 16 ft cord reaches most outlets without an extension. The manual nozzle requires operator attention during dispensing, so hands-free filling is not supported.
How it compares
Measured against everything we stock in Pumps, Sprayers & Pump Accessories, at today’s prices. Recalculated every night.
- Price $1,552.99
- Pricier than about 93% of the 962 comparable items (median $38.99).
Specifications
| Product | |
|---|---|
| Brand name | DAYTON |
Questions about this item
Does the 230 V AC motor with thermal protection run hot or loud during continuous daily use?
Thermal protection is built in to shut the motor down if it overheats, and the 50/60 Hz AC supply keeps noise at typical electric-pump levels.
Which drum and hose fittings must I already have to connect the 1 5/8 in suction tube and 1 in discharge hose?
You need a standard 2 in bung opening for the included adapter and a 1 in inside-diameter hose for the 6 ft discharge hose.
Will the 16 psi outlet pressure work with my existing 9763-series dispensing nozzles?
The pump is rated for 16 psi max outlet pressure and is listed for use with 9763 equipment, so it matches that hardware.
More in Pumps, Sprayers & Pump Accessories





